Search results

Search the forum Search Articles
  1. solidrunner

    3" djm lca

    I have the full DJM 3/5 kit, and it still has about an inch of rake. The front rides like stock, I like it. I used the front bump stop that came with the kit, doesn't bottom out or hit anything.
  2. solidrunner

    Twins with Twins, Anyone?

    That is some awesome stuff, the adjustable extension box is sweet. This boat is going to be bad ass when it's done.
  3. solidrunner

    Twins with Twins, Anyone?

    Are those a #6 gimbal housing, or is that all Weismann stuff? Those drives look awesome. Were Arneson's not an option for this? Bad ass project, serious dream of mine to have a Duramax powered boat.
  4. solidrunner

    3 to 4 stutter on built tranny

    Pretty sure my truck does the same thing. Evan, is there a TCM tune version that you would recommend? I had a buddy that works at a dealership flash mine with the latest update when I had him learn the trans for me.
  5. solidrunner

    Air bags

    There is no c-notch, those are the rails for the B&W Turnover Ball. The notch looking things are the bag mounts, it still has a full frame. Not for long though. There is only about 1.5" between the axle pad and the bump stop, I'm going to notch it in preparation for doing a 4 link and air ride...
  6. solidrunner

    Air bags

    If we're reviving an old thread, here is what I did: http://www.duramaxdiesels.com/forum/showthread.php?t=69568
  7. solidrunner

    Pcv idea

    I have a catch can on my truck, it works great. I didn't want the drip in my driveway from open air PCV.
  8. solidrunner

    Wheel/tire combo with 3" lower

    My 22x9.5 Fuel Mavericks have a +20 (or +25, can't remember) offset and they are perfectly flush in the front. Had to add a 1.5" spacer in the back to make them flush. Tires are 305/40-22
  9. solidrunner

    Helper bags with a 3/5 drop

    None at all. I hauled a car home yesterday, ran 20 psi in the bags. They are working awesome.
  10. solidrunner

    lowering

    I have 22x9.5 with a +25 offset and they are perfectly flush with the fenders. 3/5 drop with 305/40s and they just barely rub the sway bar at full lock. I did have to trim the inner fender liners.
  11. solidrunner

    Swapping a used built trans worth it?

    Can anyone tell me what the bell housing bolt torque is? I'm finally doing this swap tomorrow.
  12. solidrunner

    lowered truck pics

    Yes they are. And thank you.
  13. solidrunner

    Question: Fuel Wheels

    I have a set of Fuel wheels in the PVD chrome. They look awesome and it holds up like powder coating. If you get them in a non-bro offset, they look great.
  14. solidrunner

    lowered truck pics

    Thanks for the compliments. I spent hours measuring and searching to be sure they'd be flush. I've got a 1.5" spacer in the back, that made a huge difference.
  15. solidrunner

    Swapping a used built trans worth it?

    Ordered trim valve and shift valve springs from ATP today....getting closer.
  16. solidrunner

    Swapping a used built trans worth it?

    That's how I'm going to justify it. Hopefully it will last a while, truck has no tuning right now, waiting till I get the head gaskets/studs done.
  17. solidrunner

    Swapping a used built trans worth it?

    I'm well accustomed to the snow ball and the hill. I've only owned the truck since the middle of October and it was bone stock when I bought it.
  18. solidrunner

    Swapping a used built trans worth it?

    Another question, what sort of fluid should I use? I know it calls for dex/merc, but should I run Transsynd or something like that? I'm doing both filters while it's apart for the valve body/internal harness swap.
  19. solidrunner

    Swapping a used built trans worth it?

    I drove the truck today, it holds power just fine. I know its an awesome deal, but you know how hours of forum reading goes.... your brand new truck needs a motor after a while. I just needed someone else to tell me it's all going to be okay. I can do the swap at my uncles shop, two lifts right...
  20. solidrunner

    Swapping a used built trans worth it?

    I have the opportunity to get a trans that was built by Scott at SDP. I just have to swap it out of my buddies truck and swap my stock one into his. The trans has about 40,000 on it, no racing, just towing a 6,000 lb boat and occasionally driving like a dick on Rob's tunes. The donor truck is an...
Top Bottom