3" djm lca

[lowslowlb7]

Anybody running the 3" lowering lca on their truck with just 3" drop shacks in the rear?

I have my front end decranked now with the 3" drop shacks in the read. I am happy with height, but the ride could use a little more travel up front.

Was thinking I could just run the djm lca's and that will drop it 3inchs and then I could crank the front up a little more then it is now to gain travel.

Thing that makes me think about it is I don't want a ridiculous amount of rake.

 

[Awenta]

Then you'll just have to lower the rear some more


Sent from my iPhone using Tapatalk

 

[1SloLMM]

If you want to stay at the height your at you'll probably have to cut off the lca stop on the frame. Had to cut it off for coilovers and it's way lower then stock without hitting anything

 

[solidrunner]

I have the full DJM 3/5 kit, and it still has about an inch of rake. The front rides like stock, I like it. I used the front bump stop that came with the kit, doesn't bottom out or hit anything.