Bought, wrecked, rebuilding a 2009 LMM
- Thread starter malibu795
- Start date
What’s your plan
You going to put the GMT400 on that chassis and build something?
Yep, the frame on my 97 C3500HD is paper thin and ripped in a few areas. To fix either I burn 100+ hrs of rod and wire to build it back up, and fab new cross members.. or swap to a 800/900 chassis. And I can either leave it a 454/NV4500 or swap a dmax Alison.
I've still got my 19.5 that fit the 800/900 dually hubs. I loose a little in braking but gain a lot of availability of service parts. Plus I can move the parking brake from tail shaft to wheel hub
Used drw axle can run upwards of 4k
Outside snagging few parts nothing major is going to happen with this project
Well LMM has thrown a P0101 MAF code 3 times, all at idle in last 2 days.
Still running OEM air filter setup.
Hmm
Swapped in a different MAF sensor time will tell...
If not.. well there's tuning
Still running OEM air filter setup.
Hmm
Swapped in a different MAF sensor time will tell...
If not.. well there's tuning
Last edited:
A little back up info for you
Swapped out the MAF sensor for a spare I had.. code hasn't come back.. for now
Made it home without blowing the tire.. swapped the spare on.. paid 4-500 for a set of 5 last summer? Got 8k miles of out then so far..
Been running AT3 XLTs for a while..
Saw cooper released these
Had that happen to me a month ago coming home from the lake. Drove an hour and a half on it and barely made it lol
Got 30k off that set.
The AT3s are awesome....untill you get high centered
Attachments
Seams cooper is fazong out AT3 XLTs line
Found a 07-13 bed, heading to go get it..
Probably get everything washed on the way home get he moss off the trailer?
Probably get everything washed on the way home get he moss off the trailer?
Looks like a mini garden on there.
Wishing i put air ride on this trailer
Also need gauges including EOP seams the scanners I have won't live data EOP?
Last edited:
