Search results

Search the forum Search Articles
  1. Fingers

    Dynamite oval pattern injectors

    I'm trying out a set of Dynomite's oval pattern injectors on my truck. It has been some 10 years since I did Anything on the engine, and it shows. Right now I'm fighting stuck bolts and clamps, but discovered my bollows are blown on the up-pipes too. What other joys await me!?
  2. Fingers

    Machine Down!

    Covers off the VF-3. Several issues all at once. Machine Down! High/Low Gear sensor flaking out. Might require removing the motor and transmission to get to the SOB since it is under the transmission, under the motor. Main Coolant line feeding the head has a big split in the Cat Trac. Wonder...
  3. Fingers

    New place to burn a hole ina piston. No crack, just hole.

  4. Fingers

    Cracked Piston

    Well, it finally happened. Although it was preventable. Two Cast Oval Bowls cracked in a full on race build running well over 1000 HP. The cracks are on the outside of the piston and run from the pin boss up through the steel ring land. Most likely caused by ring stress from loss or reduction of...
  5. Fingers

    $100 off Sale!

    In Celebration of my 56th birthday, all Paid orders for Cast Piston Sets from now until September 15, 2016 are $100 off retail and wholesale prices.
  6. Fingers

    So, Why Oval?

    This http://www.duramaxdiesels.com/forum/showpost.php?p=957850&postcount=1 Kinda torqued me off. Obviously the A$$hat hasn't bother to look into what the heck he is talking about.
  7. Fingers

    Strange Failure

    I have a customer that has managed to break a piston, but not in a way I am familiar with. The cracks are between the pin and the crown, but do not extend into either. They do not show on the underside either. The is some discoloration of the metal, but not conclusive of overheating. Very...
  8. Fingers

    Another Piston Set

    I have a set of Standard bore 16.5:1 cast ovals without reliefs on the shelf that I want gone. First $1975 takes them and I'll include ground shipping to the lower 48.
  9. Fingers

    Crank Plots

    I've been working on this for a while using the raw data. I finally decided I needed to start making plots to show what I am talking about. The Blue line in these plots represents the time between crank pulses. The variation is visible at all RPMs, but fades in my plots because the duration...
  10. Fingers

    Cam Gear Loading on Crank

    Been Thinking. Always a dangerous thing when I start thinking. How much torque does it take to make the cam gear slip on the cam shaft? We know the cam gear slips on the cam shaft because of all the damage to the alignment pins on stock cams. Even at stock power levels. The cam gears are...
  11. Fingers

    Left over piston set

    I have a set of already made up Standard bore pistons I would like to get off my shelf. Std bore 16.5:1 compression No valve reliefs Weight matched Includes Pins and Rings First $1850 plus shipping gets them. Jon
  12. Fingers

    The Highest Form of Flattery

    From a friend. Not my pistons.
  13. Fingers

    Oval Piston Roll Call!!

    If you are running a set of ovals, let us know how you are doing. I have not heard from most of you after the sale. That could be could good or bad and I want to know.
  14. Fingers

    New Addition To The Shop

    Arrived last Tuesday. Should be operational this coming Thursday.
  15. Fingers

    Compression Calculator

    Seems the calculator I was using from somewhere else had a math error in it. Here is my version. Enjoy. http://jemcelravy.com/piston/cr.xlsx
  16. Fingers

    Cranks

    So, I've been looking at why cranks fail and what we might be able to do about it. I don't see this turning into a product, so I am going to open this up to the community. I'll open with a simplified model of the first throw of the crank and a representation of only the Max force from a...
  17. Fingers

    CP3 Controllers

    Dual CP3 controllers are available from me for $155 shipped to the lower 48. They have short harnesses that fit neatly between the two pumps and have a fused power lead that reaches the battery tap on the side of the engine. Longer harnesses are available on request as are controllers for...
  18. Fingers

    Out of Town

    I will be away from the shop for about 3 weeks on business. I prefer you contact me via PMs here as I will be working nights. I will fill any paid orders when I return.
  19. Fingers

    Oval Chamber Pistons

    I have several sets of 0.020" over piston blanks on the shelf ready for machining. Drop me a PM for a price. You will be pleased.
  20. Fingers

    Oval Chamber Pistons

    I have several sets of 0.020" over piston blanks on the shelf ready for machining. Drop me a PM for a price. You will be pleased.
Top Bottom