Search results

Search the forum Search Articles
  1. Moneywellspent

    Silencing a 96 turbine

    I had found the hard way that a 4" with a 30" FTE is way to restrictive for a 475/96 turning 4k+ rpms. My tuner told me 96mm flow alot of exhaust which I believe him because I couldn't go over 80mph at wot until the clamp to the muffler came loose and shot that off lol. So I'm kinda set on a...
  2. Moneywellspent

    Cryo heat?

    So not to long ago I came across this company called cyroheat. A lot of their work consists of cryo treatment and micro polishing. They're claiming that it extends service life, reduces friction and heat and so forth. The finished product looks amazing but if you ask me the claims are kinda far...
  3. Moneywellspent

    Hood/fender gap

    Ok so I'm at my wits end with this. My drivers side fender/hood gap is noticeably larger than the passenger side. I wanna say it's an even 1/2" gap on the drivers side but the passanger is a perfect factory gap. I tried adjusting the bolt by the wiper cowl and it only brought it down a tad...
  4. Moneywellspent

    What cam

    Well when the work schedule opens up I'm going to be taking the truck to ppe for an engine build. Build consists of their DD special with some extra stuff like stage 1 heads from SoCal and a SoCal AF cam. But I need some input on what cam to run. I will be going with exergy 100%s that way I...
  5. Moneywellspent

    Blew up a cp3 today

    Well over the course of the weekend installed a Exergy 10mm that I bought used from some guy back east. He claims it had very little use and was in perfect condition So I drove it lightly for about 20 miles after I got it installed and everything then finally went out to do some logs on a...
  6. Moneywellspent

    Fuel rail questions

    So I did some data logs awhile back and come to find out my cp3 was only holding about 18.5kpsi. I have stock injectors still but got a screaming deal on a exergy 10mm. I know it's a little bit of over kill for stock sticks but I plan on upgrading those after deployment. But before I just...
  7. Moneywellspent

    Flow testing cp3

    Does anybod know where I can get a cp3 flow tested on the west coast? Bought a used 10mm stroker pump and now I'm starting to think It would be a good idea to have it flow tested before I throw it in and having it tested on the west coast would only minimize shipping times rather than sending it...
  8. Moneywellspent

    Race wars LA

    So who's all going to that race war event at irwindale raceway? Some friends and I are planning on going this Saturday, hopefully we can see some more diesel guys, also their rules sheet say all cars require a muffler and I know most tracks say one thing but don't really care to much on that...
  9. Moneywellspent

    Trouble with 1/8m consistency..

    Well went to the track Friday night and I finally broke into the 7s. My time was 7.94 and a 1.4 60'. Not sure how accurate this slip is or if the solar system aligned just right because I'm usually around low 8s but it's hard to find that consistent launch... Here's the kicker that was on...
  10. Moneywellspent

    Heat exchangers

    Went to the track last Friday night and my trans gauge was showing 210*. So since my truck sees only street/strip use and no towing I'm thinking a bed mounted cooler would be a good way to go but has anybody ever used water to oil heat exchangers? C&r racings biggest heat exchanger is rated over...
  11. Moneywellspent

    Leaf bushings

    So I'm trying to put these caltracs on and my problem is this... My front leaf spring bushing bolts are seized in there all together. The bolt spins but won't come out of the bushing. I've tried pounding it out with a hammer after a few days of soaking it in pb blaster and still no dice.. I'm...
  12. Moneywellspent

    Tricky boost leak

    So I'm about to hunt down a boost leak in my system. The only thing is I think it's coming from o ring in my v-band clamp. And that's located on the discharge of the turbo. Any good tips how I would go about checking that one spot? Or should I just take it apart and throw a new o ring in?
  13. Moneywellspent

    Htt pedestal studs

    Does anybody know where I can find some studs? I know it takes m10x1.5 bolts but can't find any stud in that size. Maybe 7/16ths?
  14. Moneywellspent

    Lift removal Q?

    Ok so I currently have a 6" pro comp lift that I'm wanting to remove and I know I need some factory parts but I don't know what all I need. I know for sure I need the crossmember that sits under the front diff, the Cognito ear piece for the diff that got cut off, and bump stops. But...
  15. Moneywellspent

    New to forum

    Been lurking around this forum for awhile now and just decided to make the jump from my last forum to this one. Hoping to meet some new people and get some good insight and help out in anyway.
Top Bottom