I got the McMaster part number somewhere, let me find it and I’ll post it. I think a 10 pack was less than $10.
Bought, wrecked, rebuilding a 2009 LMM
- Thread starter malibu795
- Start date
Wonder if the E clip has spring as well?
DHD 500-315 Lower Radiator Hose Clip & Seal Kit 2006-2016 Duramax
DHD 500-315 Lower Radiator Hose Clip & Seal Kit 2006-2016 Duramax
dirtyhookerdiesel.com
I haven’t had the clip go bad on anything yet.
Last edited:
Got a few parker stores around me.. see if I can get lucky
Hope it's as simple as the O-ring.
Me too... Checked my other lower radiator hose and it doesn't have an o ring in it..
~240.00 for a duralast replacement
Lol
Maybe it’s just missing then? Ha
I wish, it's been holding coolant since December ???
Well swung by parker store they don't even have the -226 number of the system.. another dedicated seal/packing place has it in stock ~1.50 each
Guy behind the counter says he can swing by and pick it up for me on his way to work..so I flipped him some cash, and I'll swing by tomorrow
Guy behind the counter says he can swing by and pick it up for me on his way to work..so I flipped him some cash, and I'll swing by tomorrow
Used the mcmcaster-cart number and the parker store number
Found them on Amazon through "mr o-ring store as well
Well good/bad news..
Got o-rings they gave me 2 226 and 2 smaller 225s.
The 226 are made out of Viton 70A duramete
Temp range of -15F to 450F
The 225 are Silicone variant generally seams to run -40F to 450F
Got o-rings they gave me 2 226 and 2 smaller 225s.
The 226 are made out of Viton 70A duramete
Temp range of -15F to 450F
The 225 are Silicone variant generally seams to run -40F to 450F
Yeah, 1.859ID..
The -15F low side could be an issue this winter.. it usually gets to around -20F here in Ohio.. but that's ~6-7 months away