T4 pedestal with wastegate.

[bigbird]

Anyone build one for an S400 or GT 42 sized charger?

 

[bullfrogjohnson]

There is a post of one from sema floating around here somewhere but I cant remeber who made it. IIRC it was a II unit I belive TTS had something to do with it, I dont think it has made production yet though

 

[bullfrogjohnson]

On Edit I am 100% sure that Turbonetics makes it

 

[bigbird]

On Edit I am 100% sure that Turbonetics makes it

Thanks, gave them a call and they are not on the market yet.

 

[paint94979]

Thanks, gave them a call and they are not on the market yet.

Don't hold your breathe on these they have been on display at SEMA for the past 2 years

 

[malibu795]

iirc engennerind diesel make a T4 plate that goes betweent he turbo and pedastal that you can mount a waste gate on

 

[Noreaster]

http://www.engineereddiesel.com/wastegates

 

[dmaxvaz]

bullseye sells a t3 and t4 pedastal

 

[NJ_LLY]

The Bullseye can't be gated

 

[Josh2002cc]

Could one not take a cast pedistal and drill a hole for the wastegate?

 

[dmaxvaz]

could one not take a cast pedistal and drill a hole for the wastegate?

yeah, i seen a aurora 5000 with a wastegate like that

 

[Noreaster]

Could one not take a cast pedistal and drill a hole for the wastegate?

Better off doing that to a welded tubing pedistal

 

[dmaxvaz]

better off doing that to a welded tubing pedistal

those crack from heat and weight of those turbo (s400 or gt42)

 

[JOHNBOY]

The Bullseye can't be gated

Sure it can be. You need to make a spacer to to go between the pedistal and the turbo. Engineered diesel makes them.

 

[NJ_LLY]

Rite it can be done with a spacer. The Bullseye charger cannot be gated only the pedistal can be WITH A SPACER.

 

[dmaxlover]

While we're on the subject, anybody have the dimensions for a T4 flange.

 

[McRat]

I know I've published them a few times, let me look.

 

[Idaho CTD]

I believe the bolt hole pattern is 2.75 x 3.25. The gasket size I have is 3.6 x 4.35.

 

[Josh2002cc]

Does anyone have the link to the place where they were selling t4 pedistals for 300 bucks or whatever it was? It was posted awhile back but I cannot find it.

 

[McRat]

I believe the bolt hole pattern is 2.75 x 3.25. The gasket size I have is 3.6 x 4.35.

That sounds right, but I have to wait for Monday to check.