September '25 Chat - Tom's retirement

Status
Not open for further replies.

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
23,034
8,045
113
Phoenix Az
If you guys get good at it, word of mouth will spread and you'll be booked solid forever.

Oh by year end, rack will have paid for its self. 2 more years and im having the owner upgrade to a much nicer one with ADAS capabilities
 

malibu795

misspeelleerr
Apr 28, 2007
9,212
1,456
113
44
in the buckeye state
Oh by year end, rack will have paid for its self. 2 more years and im having the owner upgrade to a much nicer one with ADAS capabilities
There's an ad for a hunter DSP400 for 1500.00 local-ish to me.

I've got be really selective who I take my wagon to as it runs a Shim setup vs cam bolts
 

1FastBrick

Well-known member
Dec 1, 2016
3,304
1,617
113
Junkyard
Probably should have stepped back yesterday, the pulling is most likely due to the shit tires I have on it right now.

Still doesn't excuse the 30 minute job taking 2 hours and then damaging parts
The Problem was he had to figure out what to damage and exactly how he was going to do it. That's why it took so long... :LOL:

Sure any one could show up and do the job they are supposed to do, But what's the fun in that? It's more fun to be creative and figure out alternative ways one can achieve similar results that are close enough, but not exactly right...

Sorry, my sarcasm is acting up again...
 

1FastBrick

Well-known member
Dec 1, 2016
3,304
1,617
113
Junkyard
I did the same for my LMM unfortunately I will no longer take my truck there, after them trying to do the alignment for 6 hours and then telling me they couldn’t align it because of my tie rod sleeves. I forced my way to the back and grabbed the tools and did it myself ?
Wow, 6 Hrs... I don't have the patience to wait that long. I am fortunate the guys I use are fairly good. But they also know I can turn wrench's too.
 

malibu795

misspeelleerr
Apr 28, 2007
9,212
1,456
113
44
in the buckeye state
The Problem was he had to figure out what to damage and exactly how he was going to do it. That's why it took so long... :LOL:

Sure any one could show up and do the job they are supposed to do, But what's the fun in that? It's more fun to be creative and figure out alternative ways one can achieve similar results that are close enough, but not exactly right...

Sorry, my sarcasm is acting up again...
Check out post 36..
Swung by Midas this afternoon, assistant manager was there and his story is only store manager has the authority to do refunds.

He gave me the "certified mechanic" line.. snapped back, give me a ASE topic and I can be a "Master tech" in under a week or 2.. certs use to mean something 20-30 years ago. A legitimate mechanic doesn't do this type of work quality. He wasn't there yesterday so I didn't jump his case personally.. did mentioned the store manager doesn't seem to have legitimate credentials to being a store manager. And seams like a corporate type that no functional knowledge on how a shop works..
Says he works Tuesday through Saturday. They close at 6.. I get off work soon enough..

Should be able to do a charge back through the bank.. probably cost me 30-40.00...on a ~100 bill
2 guys for 2hrs on a 30 minute job they lost money on the get go
 

1FastBrick

Well-known member
Dec 1, 2016
3,304
1,617
113
Junkyard
Check out post 36..
Swung by Midas this afternoon, assistant manager was there and his story is only store manager has the authority to do refunds.

He gave me the "certified mechanic" line.. snapped back, give me a ASE topic and I can be a "Master tech" in under a week or 2.. certs use to mean something 20-30 years ago. A legitimate mechanic doesn't do this type of work quality. He wasn't there yesterday so I didn't jump his case personally.. did mentioned the store manager doesn't seem to have legitimate credentials to being a store manager. And seams like a corporate type that no functional knowledge on how a shop works..
Says he works Tuesday through Saturday. They close at 6.. I get off work soon enough..

Should be able to do a charge back through the bank.. probably cost me 30-40.00...on a ~100 bill
2 guys for 2hrs on a 30 minute job they lost money on the get go
Oh Jezz, it was Midas... They are so bad even there commercials suck...

Yeah, I commented on that one too... I don't know how you guys have the pertinence for this crap.
 

malibu795

misspeelleerr
Apr 28, 2007
9,212
1,456
113
44
in the buckeye state
Oh Jezz, it was Midas... They are so bad even there commercials suck...

Yeah, I commented on that one too... I don't know how you guys have the pertinence for this crap.
Shit #39 I can't type..
Fine.
Here
IMG_20250906_142032627.jpg

I wouldn't claim I have pertinence knowledge in general in talking about myself ?
 

TheBac

Why do I keep doing this?
Staff member
Apr 19, 2008
16,914
3,418
113
Mid Michigan
1200px-WTC_smoking_on_9-11.jpeg


Please, never forget what happened 24 years ago this morning. I know I never will.
 

paint94979

Beer Nazi
Sep 18, 2006
11,742
33
48
39
1200px-WTC_smoking_on_9-11.jpeg


Please, never forget what happened 24 years ago this morning. I know I never will.
I'll never forget where I was when my science teacher told us what had happened... The look on his face was that of pure horror.
 

TheBac

Why do I keep doing this?
Staff member
Apr 19, 2008
16,914
3,418
113
Mid Michigan
People can take these Renaissance Festivals very seriously. Went to one this past weekend, and I had a lot of fun just people-watching, checking out all the cool costumes. Spent most of my time goofing off with my grandson. Fun having a beer with my Son-in-law, too.
Roni dressed up, looked like a medieval Lara Croft, and looked stunning. Daughter looked beautiful in her outfit, too.

I ran into a group of guys dressed as monks as I was pushing the grandson in his wagon. So I joke, "You guys should've done the whole 'Monty Python' schtick." Well, they all bust out their forehead boards, including small whoopie cushions on the ends. They then proceed to go into a chant, and Whomp! -- hit themselves in the heads with the boards, making fart noises! Then the "lead monk" gives me a blessing, "May your flatulence be sweet, your smell be divine". It was Fricking hilarious! Made my day. :ROFLMAO:
 

TheBac

Why do I keep doing this?
Staff member
Apr 19, 2008
16,914
3,418
113
Mid Michigan
20250921_142728.jpgRoni's starting to put together displays for my retirement party. UPS gave that 727 model to my Dad after he brought their air business to our airport. Sat on a shelf in his office, and now I have it.
Not to mention the 100s of balloons and other stuff she and my kids are planning. She has a binder going with ideas, drawings, lists. I guess she even has our son 3d printing a model of that pkg dropbox I placed on my route years ago. Oy vey.
 

Attachments

  • 20250921_143652.jpg
    20250921_143652.jpg
    194.5 KB · Views: 9
  • 20250921_143733.jpg
    20250921_143733.jpg
    239.1 KB · Views: 9
Last edited:

TheBac

Why do I keep doing this?
Staff member
Apr 19, 2008
16,914
3,418
113
Mid Michigan
TRIK, thats great!

Joe, shed turned out very good! I see your inspector stopped by to check things out. :LOL:
Now you just need some little tykes playsets for those goats to play on.
 
Status
Not open for further replies.