I m thinking my rear leaf springs might be wore out, truck has 250K on it. I occasionally tow with it on the weekends usually 8k or so. Just feels like it rides ruffer then it use to. Anyone replace these or upgrade? do the bushings go bad often or springs and everything just wear out. its a...
looking at going with a 20 or 18 inch rim with a 10 or 9 wide but unsure on what offset I can get away with. Truck is a 2005 gmc crew cab. torsion bars have been turned up a little bit to make the truck more leveled and still ride good.
Thanks
Also looking at getting wheels off amazon
Anyone know the part number for the injector connector gasket?
Thanks
If i cant buy just tbe gasket then whats the part number for the connector. Its on a lbz.
So the person who changed the headgaskets before i bought my lbz put the driverside one on upside down and i am changing it out with a grade c one. Will it be ok if one side is a grade c and the other is a grade a?
Truck had studs already
is there anything that you can do to check the cam and lifters without pulling the cam out? I have one head off cause the headgasket got put on upside down was wondering what are the signs of a messed up lifter or cam? thanks
Wondering how the gt4094r non vane compares to the sxe366 and sxe369, stock fuel for now and stock bottom end. What you guys recommend.. its a dd that tows hear and there but usually small trailers with a side by or couple sleds on it
I have an 05 lly gmc sierra with power mirrors no turnsignal or heat, wondering what the part number is for converting them ether gm or aftermarket.
was wondering also if the turn signal would work and the heat or if they use a different plug?
read mixed reviews of them workin and not.
Any...
I have an 05 lly with a built tranny with sumcoast stage 5 and 1058 converter
Was doing some tests last night on the street.
At wot the 3 to 4 shifts weird and stutters, only does it on wot that i could tell, any ideas??
Stock turbo and motor
What is the best front end upgrade out there for a daily driver, lookin at new arms and possibly bigger tierods. Not sure if i want a new centerlink as i have heard mixed reviews.
Let me know what your experience has been
I have a 05 lly with efilive and built trans with supporting mods. I have a 1058 converter as well.
Was doin some reading about how to do a relearn and was a bit confused, when i installed the suncoast built tranny and converter i did the relearn from my efilive. But from my reading the relearn...
I have moonshine efilive on my 05 lly and I get a p0103 code every once in awhile. I clear it with my edge insight cts but it comes back after awhile.
Any Ideas on how to fix this issue?
stock turbo and injectors and cp3 with lift pump and raceplug
I have a 2005 duramax with the ssbc brake kit and it feels like the brakes are barely sticking if you lift the truck up you can turn the tire by hand but there is resistance, doesnt feel totally free, any ideas?
Anyone have the steps for lifting the cab to do a headgasket on a lbz crew cab?
Also whats the part number for the head dowels that go into the block
Thanks