Wicked vs Floor It
- Thread starter x MadMAX DIESEL
- Start date
I haven't had a chance to dyno mine since adding the 480 . but based of the duramax calculator here mine weighs 6950 and ran 121 mph in the 1/4 should be real close if not just over 800
I am going by what the experts have told me over the years with our heavy trucks the 10hp per 1 mph doesn't apply so it takes 20hp or so to increase 1/4 mph by 1. I am not much for calculators but I never dynoed pre modded pump/post modded pump
I should have crunched a few more numbers. Actually this is pretty close. I dynoed at 544hp with stock turbo and cp3 and ran 12.95 at 102. I ran 11.94 at 113mph this year. I guessed that i was around 720ish rwhp. This calculates to about 764 so it is pretty close really.
Plugging my weight and mph into comp diesel's calculator on my stock pump I ran 12.32 @ 108 i see 572 hp then at the same weight i went 11.84 @ 115 which says 691 hp obviously i really don't care much about horsepower numbers all i care about is ET but it would be fair to say I gained over 100hp stock pump vs. Wicked Diesel pump
Maybe John did have health issues, im not sure, but when people were saying he was in the hospital, i was seeing him at truck pulls last year. Ill be buying some modded pumps before the seasons over im sure, and id love to go local to me, but after talking and reading, ill probably be going with Shane at Wicked diesel. I still run 2 stock pumps now, but am nowhere near 800hp yet.
Rob 2.6 trucks are in like the 600hp range you might be 620hp cuz you won TS lol. The main reason I went with WD is becuase people on here have had good luck with them and Pat I believe did some testing and it came back positive that they were the better modded pump on the market. And I know Pat and nothing to gain by me bying a pump from his reports.
Well I just think it'd be nice to.know what your getting for 1700 bucks? Kinda like saying injectors are 150 HP I don't care what HP they are I want to know a percent over lpm? Make sense? Maybe my question is how many more lpm or whatever measurement you want does wicked an floor its stage 3s push?
I could get a brand new stage 1 pump from a local guy for 1200, or a stage 3 for another 700. He said the stage one would be around 42% and the big one would put me closer to duel cp3s, just not there. But no single pump will ever be the same as duels as far as performance. and should both work great for 60 overs. These pumps are non stroker pumps so they should last quite abit longer than Wicked or Floor its modified pumps. Hmmm
Don't believe everything you hear
look to real world before and after. Jim from Upstate Diesel went 11.77 on a S472 and shanes pump. If it really matters Shane said his stage 3 pump is 80% over but like I said that means nothing all that matters is rail pressure
They've been run on the best flow benches available & on competition trucks at a very high level. :thumb:
Don't believe everything you hear
There should be a bit more in it...:thumb:
Thanks for that fellas number Mitch, I may go that route. I wish Shane or John would get in this thread with some numbers
Also who told you stroked pumps wear out quicker? Where are you getting your info from? LOL you may or may not know this Bosch made a very important change to the LMM pump... LB7, LLY, and LBZ pumps share a similar cascade valve design which causes the spring to rub making it weaker over time. Bosch fixed this issue and redesigned the cascade valve so longevity is GREATLY increased. Ben I'm not sure why you feel you need more info to make a decision?
Because I'm tired of buying expensive stuff for this truck because everyone said its the way to go, then get disappointed.. And someone who works an Injection Service, who actually rebuilds Bosch injectors and can test them to Bosch standards....
