Info: Stuff and things...

[blackdirtymax]

I know what you were trying to say, and i was making a different point, so that's why i kept on the topic of not meeting me, then meeting me, etc.

This is just stupid Tim , lets just let it go , you are happy where you are and that's great , I have nothing to gain by sitting here arguing with you over stupid stuff that doesn't make a difference one way or another ! Good luck in all you do and I mean that whole hardly .

 

[blackdirtymax]

Funny part was that there was no DTS parts on my truck for the DPC. Just his generosity and him hooking me up with Phil Taylor

Okay well I guess I misunderstood you say something about the great port work "David " did on your heads that you weren't happy with from Guy . If that was after DPC, sorry I misunderstood . I can admit when I'm wrong ....

 

[juddski88]

This is just stupid Tim , lets just let it go , you are happy where you are and that's great , I have nothing to gain by sitting here arguing with you over stupid stuff that doesn't make a difference one way or another ! Good luck in all you do and I mean that whole hardly .

I agree. I'll talk to you about it over a case of beer when I visit

 

[McRat]

Diesel Technology Source

Please use thread titles that tie into your content.

While it's not a biggy, tech threads should be in hard parts.

Thanks!

I didn't read this thread until just now, so I imagine there are lots of other folk who thought it wasn't a tech thread.

 

[juddski88]

Please use thread titles that tie into your content.

While it's not a biggy, tech threads should be in hard parts.

Thanks!

I didn't read this thread until just now, so I imagine there are lots of other folk who thought it wasn't a tech thread.

Pat,
I am confused
I didn't start this thread, Josh renamed it. James (BigChevyHitch) started the thread originally as a tech thread about head porting. I responded with a suggestion and then my results when asked to by Josh. Guy turned it into a sh*tshow, and it went downhill from there. I called Kyle and asked him to clean it up this morning, so now the tech and crap are two separate threads.

Thanks,
Tim Judd

 

[S Phinney]

You have had issues with everything except your block Shane....you defend your machining and assembly like they are hallowed....but all your issues are other peoples problems...i wish i could turn off the bluntness tonight but i cant...i don't have any problems with you personally, but it gets old hearing all the complaints

Tim I am not trashing anyone hear. I don't complain about people either. If I were to complain about David I would post up pictures along with all pertinent information that gas occurred but I choose to leave it along. I have no agenda with anyone on this forum. I'm not really sure what you are getting at here.

Sent from my DROID RAZR using Tapatalk 2

 

[McRat]

Pat,
I am confused
I didn't start this thread, Josh renamed it. James (BigChevyHitch) started the thread originally as a tech thread about head porting. I responded with a suggestion and then my results when asked to by Josh. Guy turned it into a sh*tshow, and it went downhill from there. I called Kyle and asked him to clean it up this morning, so now the tech and crap are two separate threads.

Thanks,
Tim Judd

Heck, I'm more confused than you are. :rofl:

Carry on!@:shifan:

 

[paint94979]

Heck, I'm more confused than you are. :rofl:

Carry on!@:shifan:

Have you lost a little of your reaction time my friend?

 

[JoshH]

Please use thread titles that tie into your content.

While it's not a biggy, tech threads should be in hard parts.

Thanks!

I didn't read this thread until just now, so I imagine there are lots of other folk who thought it wasn't a tech thread.

That's my fault, Pat. In my haste last night, I just split off the original post by the thread starter, but I didn't go through and get all the tech content. My apologies to all.

 

[McRat]

That's my fault, Pat. In my haste last night, I just split off the original post by the thread starter, but I didn't go through and get all the tech content. My apologies to all.

You did right Josh.:hug:

I'm the idiot here.

 

[blackdirtymax]

I apologize to the OP and to Josh for having to sift thru all the garbage last night . It was not my intent to derail the thread but it took an unexpected turn that I had to pursue . Again my apologies....

 

[Mike L.]

The world is going to end in 6 days. Doesn't anybody care?

 

[McRat]

Have you lost a little of your reaction time my friend?

I'm getting senile.

I hung around the Land Speed Racing guys too long and it rubbed off.

 

[McRat]

Someone in another thread called our trucks "Dramax".

At first I thought it was a typo, but ...

 

[JoshH]

Sometimes when I log on here I say DramamaxDiesels in my head... :rofl:

 

[Evan@InglewoodTrans]

The world is going to end in 6 days. Doesn't anybody care?

In a attempt to save the world I maxed out all my credit cards and spent every dime I have. That should insure nothing happens and I have to pay off all the debt.

 

[03badmaxxx]

In a attempt to save the world I maxed out all my credit cards and spent every dime I have. That should insure nothing happens and I have to pay off all the debt.

:roflmao:

 

[McRat]

In a attempt to save the world I maxed out all my credit cards and spent every dime I have. That should insure nothing happens and I have to pay off all the debt.

Good idea! :thumb:

I'll skip buying the extended warranty on our new TV.

 

[juddski88]

In a attempt to save the world I maxed out all my credit cards and spent every dime I have. That should insure nothing happens and I have to pay off all the debt.

Can i just say i planned ahead then? Lol

 

[Duraeater6.7]

That got way out of hand last night. I agree with hank about staying off the forums on Friday and Saturday nights after "several cold ones" apologies for my poor potty mouth to everyone


Twinned Lmm 120 over pump 100hp injectors