Snapped the shock mount!

N2BRK

N2BRK

Well-known member
Dec 31, 2009
2,377
712
113
1hr from home with no tools. I improvised the lug nut wrench and a Leatherman to get the shock off the upper mount and get home.

Obviously I didn’t put the caltracs on yet. Lol

I guess I’ll have to grab a new mount and cut/weld. I hope the shock is ok. It seems to have some very minor scraping on the bottom of the lower mounting eye.

The weld held to the axle tube.

A crappy ending to a good day’s black powder shooting. 5hr round trip. Glad it happened on the way home :)

Cleaning the flintlock in the dark. Summer is passing :(
 

Attachments

  • IMG_2130.jpeg
    IMG_2130.jpeg
    431.3 KB · Views: 67
  • IMG_2131.jpeg
    IMG_2131.jpeg
    542.5 KB · Views: 57
  • IMG_2132.jpeg
    IMG_2132.jpeg
    609.6 KB · Views: 43
  • IMG_2133.jpeg
    IMG_2133.jpeg
    176.4 KB · Views: 44
  • IMG_2134.jpeg
    IMG_2134.jpeg
    439.3 KB · Views: 57
2004LB7

2004LB7

Super Moderator
Staff member
Dec 15, 2010
8,554
3,059
113
Norcal
Something tells me that extra leverage from that bracket isn't good for the stock mount
 
N2BRK

N2BRK

Well-known member
Dec 31, 2009
2,377
712
113
Without it, the shock is almost horizontal and useless (installed drop shackles).
 
N2BRK

N2BRK

Well-known member
Dec 31, 2009
2,377
712
113
It gets worse. Apparently, I moved the axle and the other shock mount is being ripped off the axle and is a little twisted.

XDP says I ordered their last mount. Gotta check turn 14 etc. Ugh.

I also need a larger head on the center bolt. The one that Deaver sent barely makes it into the perch, when I’m running the axle shim, and let the axle move.
 

Attachments

  • IMG_2145.jpeg
    IMG_2145.jpeg
    514.6 KB · Views: 40
N2BRK

N2BRK

Well-known member
Dec 31, 2009
2,377
712
113
Yes, Sir. I was just looking at McMaster-Carr for 10mm socket head cap screws. I think it’s a c-hair oversized. I can turn it down for a good fit.
 
2004LB7

2004LB7

Super Moderator
Staff member
Dec 15, 2010
8,554
3,059
113
Norcal
N2BRK said:
Yes, Sir. I was just looking at McMaster-Carr for 10mm socket head cap screws. I think it’s a c-hair oversized. I can turn it down for a good fit.
Click to expand...
I believe I had to grind a little off the head of the bolts I used
 
1FastBrick

1FastBrick

Well-known member
Dec 1, 2016
3,307
1,617
113
Junkyard
N2BRK said:
It gets worse. Apparently, I moved the axle and the other shock mount is being ripped off the axle and is a little twisted.

XDP says I ordered their last mount. Gotta check turn 14 etc. Ugh.

I also need a larger head on the center bolt. The one that Deaver sent barely makes it into the perch, when I’m running the axle shim, and let the axle move.
Click to expand...
What did you buy, the Longhorn fab 201108 lower shock mount ?

Check with the Dmax store
 
N2BRK

N2BRK

Well-known member
Dec 31, 2009
2,377
712
113
Correct.

Dmax is in CA and I’m in NJ. I called Long horn yesterday (Ohio) and their answering machine said to email for faster reply. So I did to see if they were in stock and shipping. No reply. I just went to call now and they are closed until Tuesday. Ugh.

I’d planned to call them back, but was out in the Pine Barrens longer than expected yesterday, when my buddy went swimming. Hahaha. I had to help him out and get the bike running again :). I did both ?
 

Attachments

  • IMG_2150.jpeg
    IMG_2150.jpeg
    483.1 KB · Views: 22
  • IMG_2152.jpeg
    IMG_2152.jpeg
    546.9 KB · Views: 21
  • IMG_2155.jpeg
    IMG_2155.jpeg
    530.6 KB · Views: 20
  • IMG_2157.jpeg
    IMG_2157.jpeg
    783.3 KB · Views: 20
  • IMG_2149.jpeg
    IMG_2149.jpeg
    564.5 KB · Views: 22
N2BRK

N2BRK

Well-known member
Dec 31, 2009
2,377
712
113
I’m in NJ. DMAX Store is in CA - which means longer shipping to me.

Longhorn just emailed me. In stock and shipping. Says XDP should have had them drop ship when I asked on Wednesday. So I ordered 2x from Longhorn just now.

Original order from XDP is still sitting delayed at UPS in Las Vegas. We will see what arrives first! lol
 
1FastBrick

1FastBrick

Well-known member
Dec 1, 2016
3,307
1,617
113
Junkyard
Oh, I miss read that. Thought you were on a trip in CA. My apologies. Was going to offer a complete rear end to get you mobile again.

Probably get long horn delivery first. I believe dmax store moved to Reno side after C.A.R.B fined them. They have a location still in CA but I think everything else moved out of state.
 
You must log in or register to reply here.
Top Bottom