Got my truck up and running with the net HTT turbo. Runs not bad. Still running my old tune before I did the headgaskets and swapped out the stock turbo. But I've got some massive turbo bark going on. I can't even really rod on it at all because when I go to let out of it it barks so easily.
Is this something I can tune out?
Is the blow of valve an option that would work well?
What can I do about this?
I will be working on my tuning in the coming weeks to try and get it running nicer, spooling a bit quicker and it would be nice to get rid of the bark. Let me know of any suggestions.
Right now, the waste gate is set to make about 30-35 psi boost and according to my gauge that only goes to 30psi I am making it no problem. According to my log, it looks like the wastegate is functioning properly because between a half throttle run and a full throttle run I almost made the same amount of boost. Kinda caps off just about 300kPa... and I think that is absolute pressure, so minus 14 psi off whatever the conversion was.
Is this something I can tune out?
Is the blow of valve an option that would work well?
What can I do about this?
I will be working on my tuning in the coming weeks to try and get it running nicer, spooling a bit quicker and it would be nice to get rid of the bark. Let me know of any suggestions.
Right now, the waste gate is set to make about 30-35 psi boost and according to my gauge that only goes to 30psi I am making it no problem. According to my log, it looks like the wastegate is functioning properly because between a half throttle run and a full throttle run I almost made the same amount of boost. Kinda caps off just about 300kPa... and I think that is absolute pressure, so minus 14 psi off whatever the conversion was.