LLY/LBZ/LMM How to make a smooth boost table

[McRat]

in a couple minutes.

This also shows a technique for modifying any table smoothly that doesn't have zero (0) as a base number.

 

[McRat]

Continued:

 

[LBZrcks]

Cool Thanks Pat.

 

[LBZrcks]

You said it was bad to add at Idle, but what if I wanted to add just a little to maybe change the sound at idle to more of a whistle?

 

[serpa4]

Excellent! Thanks. Now I just have to wait 5 weeks to get back to my truck to try.

 

[LarryJewell]

You said it was bad to add at Idle, but what if I wanted to add just a little to maybe change the sound at idle to more of a whistle?

You can change the whistle at idle with vane position

 

[robertleeii]

cool

 

[malibu795]

thats one way to do it

 

[McRat]

thats one way to do it

If you have another way then write it up.

A board is all about content.

 

[malibu795]

i do it in my head.. 14+30=44. i see 14.7 as 1 and go form there.. with alot of liner(sp) blending.. starting form top down.. and i use the 3D gragh alot.. too smooth out vissually.. if it aint smooth your going to notice depending on how big the dip/spike is...

im sure pat that what you put up will help out alot of poeple :hug:
could say that mine is a little more complicated ...... but end result is still the same..

i also dont like the whoel program of excell i think its the devil :rofl: