Yep! That will do it!
June '25 Chat -- School's Out....for the Summer!!
- Thread starter TheBac
- Start date
- Status
Oh hell, that looks like the start of an early '70-72 shortbox 4x4 with a 6.0 LS? Nice!
Damn near it. 72 k10 with a LSA and 6l90 in it. My dad is further than this pic shows but its coming out bad ass
Once hes done with that truck (thats for my mom, he has a 72 blazer he restored for himself), him and i are going to build a k20 for my son to have way down the road. Im debating on doing a dmax in it or putting in the all aluminum 650hp afr 427 (small block based, not LS) he has from his sand car.
I kinda want to do a dmax and do a wiring tuck like Josh did on that hot rod. Upgrade the turbo and make it a 550-600hp engine. Thought about pulling the limos engine for it but thats way overkill for that truck. I wish they had some different accessory drives though so the engine would show off more
I kinda want to do a dmax and do a wiring tuck like Josh did on that hot rod. Upgrade the turbo and make it a 550-600hp engine. Thought about pulling the limos engine for it but thats way overkill for that truck. I wish they had some different accessory drives though so the engine would show off more
It's got to be diesel. Otherwise you can't show it here except one sub forum ?
Na, garage builds is still acceptable. Hence the tracker in there 
Truck and camper ready for Pensacola tomorrow for 4 days!
Brothers 15 lml said the a/c quit working. Compressor just straight snapped something internally cause there is no movement on gauges and compressor spins with 0 resistance. Soooo big brother gets to fix it
Can you see the saft turning when the clutch is engaged?
Brothers 15 lml said the a/c quit working. Compressor just straight snapped something internally cause there is no movement on gauges and compressor spins with 0 resistance. Soooo big brother gets to fix it
Center shaft spins and is locked to the clutch when engaged. She just said “fuck you” inside i guess. No metal came out of the pump when i drained it. Slapping a napa one on and calling it a night.
I also get to put another compressor on the limo. One i replaced it with is leaking at the body.
I also get to put another compressor on the limo. One i replaced it with is leaking at the body.
Must be GM's new "CP4" AC compressor?
Well found the issue. Expansion valve was sticking and causing the low side to go into vacuum. So replace that Too and now she’s back to blow an ice cold.
Do those newer trucks use a compressor that has an unloader valve?
I wonder what happened to RedXray's truck? I could see Tom hitting the scramble button in that bad boy...
Nice catch!
Nope. Nothing special to them. Even the 2020 has nothing special.
Damn! Nice catches!!
He's a natural! Does he also clean and filet them himself?
He has a little help with that still, but is getting better.
- Status