Search results

Search the forum Search Articles
  1. 0

    C3 Clutch Count and Pressure

    Putting together a 5 speed making 1000HP. It's a 2wheel drive street/show truck that might spin the tires a few times down the track. Going to use the new G3 clutches. Already have No knock down, junior kit with Mike L springs and Evans c3 oiler. Will 6 be good or should I opt for 7? One shim...
  2. 0

    LML Commanded Pressure Issue

    I tried searching with no luck for my specific scenario. I have a 2012 LML that is commanding desired line pressure of 27psi at idle and spikes as high as 127psi while driving! I have tried with and without trans tuning and no change! Do I have a TCM issue? Thanks for the help in advance!!!
  3. 0

    Trans Electrical Issue

    2003 trans is throwing these codes immediately after clearing with key on engine off P0748 P0763 P0768 P0773 P0778 P0743 Im looking for a little guidance on which code to tackle first or possible issues to look for before I dive into the flow chart for each individual code. All...
  4. 0

    trans swap help

    I am swapping a built 2003 allison into a 2004 lb7, and then swapping the stock 2004 into the 2003. What all needs to be switched over to work right???
  5. 0

    Thread Filtering

    We should have mods that filter through and remove unrelated posts from threads. I have witnessed a increasing number of posts in threads that have nothing related to the original post. I am sure it is quite frustrating for the OP/others to sift through so many unnecessary replies.
  6. 0

    Killed a Smart Car!!!

    This is not my video, I found it while surfing on youtube. http://www.youtube.com/watch?v=3E8E1znstgc
  7. 0

    I cleaned out my center console

    and this is what I found from a few months ago. These runs were all nitrous passes.
  8. 0

    HELP with Turbo, Pump, and Nozzles

    1) Trent's s366 billet single. Should I get the basic or the premium kit? 2) Fuel Pump Mod. LBZ pump, or my LB7 pump and LBZ regulator? 3) 30% nozzles. Has anyone had any problems with Industrial Injection Nozzles?
  9. 0

    Lvms 02/10/12

    Is anyone going to Midnight Mayhem on Friday?
  10. 0

    NOS Kit

    I might be buying a kit if it checks out ok...its an NOS kit and consists of: 10LB Bottle with brackets and dump tube NOS 16020 Super Powersot Solenoid (the only info I found about this is it will flow up to 175hp and has 1/8" inlet and outlet) Bottle to solenoid line and Solenoid...
  11. 0

    STi Kill

    I ran into a 2006 STi last night on my way home. The guy claims it was making 360hp to the wheels with a few performance parts and a tune. The first race was in 2 wheel drive from a 10mph roll...he jumped on me but I ran him down and put 3-4 lengths on him before I let up. The second race...
  12. 0

    holding power

    Would somebody mind giving me a guess on how much power I will be able to safely beat the hell out of on a Suncoast 1057, C1-C5 Powerpacks, shift kit, pump kit and boost valve for a 5 speed...thanks in advance everyone.
  13. 0

    Need Stock 12632483 O.S.

    I need a stock tune if someone has it!!! Thanks in advance.
  14. 0

    Sportsman E.T. Weight Reduction Questions

    I will be running the E.T. class this season. I want to take a few things off the truck to make it as light as possible. Please let me know what I will NOT be able to remove to pass tech inspection. Rear Seat Spare Tire Hitch Receiver Tailgate Thanks in advance for the info, it is...
  15. 0

    LLY DSP5 Out of Range

    I switched a stock lly tune file to dsp5 and all the custom calibrations are out of range...for instance one table has -500 for all the boxes and another has 5000 for all the boxes. I tried switching in the stock parameters and saved but it still says out of range for those tables as soon as I...
  16. 0

    LMM Stock Torque Limits for DSP5

    My question is, If I have the stock torque limits on the base tune will that limit my DSP Program #3 and #4 tune or do I have to change the torque limits in the base tune?
  17. 0

    Changing Operating Systems

    Can you change from one operating system to another? If so how does one go about this??
  18. 0

    Cryoed LBZ rods

    Can you cryo LBZ rods? I did not think it was possible until someone on another forum said he cryoed his LMMs...which I thought were the same rods!
  19. 0

    Loss of Power

    My fathers truck is a 06 LBZ, crusing on the freeway at a constant 75mph it lost all power. He let off the throttle and got back into it with no problems. Happened three different times on the way home from Vegas. Any Ideas what it could be??? His truck has AFE, 4" TB, Suncoast V with 1057...
  20. 0

    New to Pullin

    I was going to enter my first pulling event at the local fair and was wondering what kind of tunning(ECM,TCM) would be the best for pulling. I live in St.George UTAH and there are a few heavy hitters here just dont want to get embarrased. Should i just run McRats race tune and i dont even know...
Top Bottom