Search results

Search the forum Search Articles
  1. Devon

    Stock 05 Lly drops rail real hard full throttle(limp mode?)

    Ok it was sub degree weather all day today and I get in my truck, let it warm up for a while. Go down the road and it feels like it is misfiring under wot and dropping rail to like 7-9k under partial throttle it's fine. I checked my edge cts. And it had a code for generator L low circuit. I...
    • Devon
    • Thread
    • Replies: 9
    • Forum: LLY
  2. Devon

    LLY: Cyl 3 injector question. Replace or not?

    For the last 3-4 months my cylinder 3 injector balance rate has been going from -/+0.8 or so up to 4.5-5.0. Sometimes it'll be almost perfect and other times it'll be up around 5.0-/+ I don't get any smoke or rough idle or anything. I've tried diesel kleen and 2 stroke oil which has brought it...
    • Devon
    • Thread
    • Replies: 9
    • Forum: LLY
  3. Devon

    Allison 5sp: Installed tapshifter, couple questions.

    Ok bought a fleece tap shifter,everything went easy on install but I am curious. I own a 04.5 lly but has a 01 OS tcm tune in my truck which works alot better and shifts better than my factory tcm tune. But when I am cruising in 5th gear and press "-" on the shifter I get te OD lockout like said...
  4. Devon

    Question: Eliminating some camber(lowered truck)

    Ok so my front end is as followed. Mcgaughy 3" drop keys, cognito uca's, stock lca's and rancho xl9000's adjustables. I have a pretty good amount of negative camber. Would like to straighten the tires a bit. Will the cognito uca's do this by simply adjusting Camber/alignment on a dropped truck...
  5. Devon

    EFILive New moonshine tunes for my s472!

    Just wanted to thank you tony for getting this turbo tuned in.very linear smooth hard power. Haven't touched tune 5 but damn she eats on tune 4! Wot pull to 110 egt's only hit 1250°. Love the new tuning! Top notch. Thanks Tony! Sent from my iPhone using Tapatalk
  6. Devon

    Question: Negative Cv's 3/5 dropped and launches?

    I have not 4wd launched my truck since I dropped her another 2" in front. I have pics of the angles. There pretty negative. Will I ok or is it just as bad as having them cranked up?http://img.photobucket.com/albums/v613/DevonBrown/69DED1A0-E432-417E-A37E-018B6BAD6354-1536-0000003E19FF9A8C.jpg...
  7. Devon

    Question: Lb7 intake bridge question

    Ok, there's two ports on the stock lb7 intake bridge. One is the intake grid heater coil. What is the smaller port for on the intake bridge? It's like a raised port. I had a bolt in there blocking it, but it blew out after doing a couple wot runs. Sent from my iPhone using Tapatalk
  8. Devon

    LLY: Injector keeps loosing it's seat in motor

    What can be the reason my injector in cyl 8 keeps loosing it's seat? I noticed a few weeks ago some oil around the injector/valve cover area.also my balance rate as been around a 2.0-2.5. So I pulled the hold down bolt out and it seems like that injector is too easy to wiggle around.. Could it...
    • Devon
    • Thread
    • Replies: 11
    • Forum: LLY
  9. Devon

    Help: New pics of the truck painted and 3/5 dropped

    http://img.photobucket.com/albums/v613/DevonBrown/80AF7472-F4C5-4635-BF93-674547CC066E-10313-000004F427175940.jpg http://img.photobucket.com/albums/v613/DevonBrown/3F75B5E7-461E-430F-BC45-DF0C85C63643-10313-000004F3D7AB9813.jpg 3" drop shackles with djm drop hangers set at 2" for the rear...
  10. Devon

    Help: Driver side door handle broken

    Ok, pin that slides into the inside of the door latch broke the other day, so now I can't open it from the inside nor the outside. My question is, how can I get the door opened up so I can take the door card out to replace the latch assembly? Kind of torn on how to do this. Is there a simple way...
  11. Devon

    LLY: Little build/transformation on my lly

    Well the last few weeks my truck has been getting some good stuff put into it and done to the body :). My buddy Ryan Esposito threw my s472 kit together a couple weeks back, and the truck has been in the body shop pretty much since then getting all the body work done and repainted! Check out...
  12. Devon

    Got beat by my buddies Evo 9 mr today :-/

    So my buddy has been running his mouth about how fast his Evo is blah blah. Has. Some bolt on's and a stage 2 reflash(18psi tune). We went from a dig in 4wd and we were dead even till about 65-70mph then he just walked me... But I am looking up what they run and some drivers are even hitting...
  13. Devon

    Half my steering wheel buttons do not function

    Ok my truck has a double din nav unit in the truck and comps any speakers and all that stuff. Was wondering if that had anything to do with my problem of half the controls not working. Ie stereo volume,ect. Or could it be a fuse making them not work? Sent from my iPhone using Tapatalk
  14. Devon

    Question: Leaf spring brackets

    Just curious as to if I need them oem leaf spring brackets on the leafs to keep them from moving at all? I am not sure the exact name of these but they are a bracket with what looks to be padding on the insides I think. One on each side of leaf pack.. I use spring clamps and was wondering if...
  15. Devon

    LLY: New wheels

    20x10 -19 offset. Itching to put em on! Sent from my iPhone using Tapatalk
  16. Devon

    Question: Banks Ic pipe work w/s366?

    I have been researching about this hotside pipe lining up ok with the s366, I see some people mod there pipe and add a couple inches to it to fit up, some others use a silicone coupler. Anyone have pictures of there s366 kit with the banks hotside pipe on it? I have a silicone coupler but not...
  17. Devon

    LLY: Lbz fpr making Lly act funny?

    Ok so before I put my lbz fpr on the truck tony tunes my truck and tightened up my b1010 tables to quiet the lope on my bad fpr for the meanwhile. Since then I added a lbz fpr and havnt been back to tweak the tuning. It doesn't lope sitting at idle. But it does on take off or low acceleration...
    • Devon
    • Thread
    • Replies: 6
    • Forum: LLY
  18. Devon

    Question: Wheel bearing going bad within 10k!?

    Ok, so when I first bought my truck about 6 months ago it had some abs codes. Scanned them and sure enough the driver side assembly needs R&R. So I changed out the assembly as it needed replacement ASAP. Didn't have the time to get a timken bearing. So I went with a car quest piece($150.00). Now...
  19. Devon

    Question: Liftpump filters for winter months?

    My question is, 2 winters ago I had a airdog 165gph on my 06 dmax. And it gelled up twice on me. Also had tr factory filter in the engine on aswell. This year on my 04.5lly I only run a airdog150 for filtration. No filter of assembly under the hood. Should I continue to use a 2 micron filter or...
  20. Devon

    Question: Pedistal spacer needed for s472?

    Ok so I had a deal fall through for a s366 kit, so I now am going with my original idea and doing a s472 custom kit I'm throwing together. My question is, since I'll be running ricks stainless standard t4 non gated pedistal, and a stock 02+ lb7 Y bridge, will I need a spacer for the pedistal so...
Top Bottom