2004LB7's latest activity
-
2004LB7 replied to the thread New lml engine build, no fuel rail pressure.On the last video, can't see which one os actual and which one is commanded fuel rail pressure. But if the lower one is actual then you... -
2004LB7 replied to the thread New lml engine build, no fuel rail pressure.If you got no injector signal. I'd verify your cam signal is good and in sync with the crank signal. The ECM won't fire the injectors...
-
Truck is sold.
-
I would say so, Jason. Give me a bit to find something closer to me. Got a few trucks Im going to look at tomorrow and next week.
-
2004LB7 replied to the thread May '26 Chat -- "Are We There Yet?".Does that one I posted above fit your request?
-
Tom, I am down in the southern area of CA. So if you see something out this way you might be interested in, let me know. I would be...
-
Other than that ungodly whistle, it seems fine to me.
-
Tom, if there is one in phx and the seller is willing to bring it to our shop, ill do a full inspection on it for free for you. You will...
-
Here are the stock tunes for that VIN - one is for the factory rectangular air filter housing and the other is for the 06-07 cylindrical...
-
2004LB7 replied to the thread Lml piston install.Sounds pretty good to me. Only thing I can hear that may be off is a hiss like an exhaust or boost leak
-
2004LB7 replied to the thread May '26 Chat -- "Are We There Yet?".Placerville isn't that far from me. If you are interested, I can likely go take a look at it and do a pre inspection for you. I don't...
-
2004LB7 replied to the thread Lml piston install.You need to upload it to a hosting site like YouTube then link it here to show a video
-
The Auto Cal device will be locked to whom ever sold it to you. Only they will be able to supply you with a stock tune that you can...
-
2004LB7 replied to the thread May '26 Chat -- "Are We There Yet?".Plenty here in California if you're willing to come out this far https://www.facebook.com/marketplace/item/2654882054709262/?ref=search
-
-
What was piston to deck height before- and after- the build? Did you use the same thickness replacement headgaskets or just go with Cs...
