LLY: 12.15 @ 115.6

[paint94979]

Read Rob's post first

its been raining here lately i haven't been able to test it out. It will be good insurance to have it in case i need it

 

[RPM Motorsports]

its been raining here lately i haven't been able to test it out. It will be good insurance to have it in case i need it

To turn left= floor it, slight steering wheel twitch left, stay on throttle petal, and steer right
Reverse above for right hand turns!!!

If you really want to have fun, put a DR on the Left rear. Then you just need to lift, and it turns for you..

 

[paint94979]

got the lockup controller installed tonight... i'll know this Saturday if it makes any difference

 

[paint94979]

12.14 @ 114.6 LOL... with a lockup controller that isn't workin and Drag Radials...

 

[Dan@PPE]

 

[maxaholic]

Installed error or driver error. Hell you'll get there one of these days.

 

[gmduramax]

Installed error or driver error. Hell you'll get there one of these days.

The shit aint working and its not driver error

 

[IdahoRob]

When looking at the one log you sent, I could see that it wasn't working.

Did you try any of the tcm tunes? Look on the bright side, at least you can still go to the track.:hug:

 

[JoshH]

12.14 @ 114.6 LOL... with a lockup controller that isn't workin and Drag Radials...

Did you get the pin in the TCM harness plugged in all the way? I installed one in a 6 speed truck and didn't have the pin in all the way. It didn't work either, but once I got it in all the way it worked like a charm.

 

[paint94979]

Did you get the pin in the TCM harness plugged in all the way? I installed one in a 6 speed truck and didn't have the pin in all the way. It didn't work either, but once I got it in all the way it worked like a charm.

Josh, when the TCC is on does the light on the box turn red???

 

[paint94979]

we even grounded the TCC out and I instantly lost Reverse and it set P0700 and a P0743- Torque Converter Clutch Circuit Electrical.

 

[JoshH]

Josh, when the TCC is on does the light on the box turn red???

I'm not sure. I put it in the center console and don't remember ever looking at it when it locked the converter.

 

[paint94979]

my camera sucks... so you can't see the ET or MPH but these were 12.1 passes...






<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf?file=http://vid250.photobucket.com/albums/gg254/paint94979/Picture377.flv">

 

[RPM Motorsports]

With all the blinking lights on that controler, you should Hang it from your christmas tree:rofl:!

 

[IdahoRob]

Video and log clearly shows no lockup Nick until 4th. You have the horse power (mph for sure). If you have time, please try out the other tcm tunes. I'd like to help you fix the problem.

Locked up at 64 MPH. That's a lot on the table.

 

[paint94979]

On a positive note Anthony ran a 10.02 at 139.xx today as i was recording my camera became "Full" and cut out right before he ran... BTW this was his first time driving the car

 

[Kat]

Nick it didn't work

 

[paint94979]

Nick it didn't work

i keep trying to enter the HTML link but this keeps happening?

<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf?file=http://vid250.photobucket.com/albums/gg254/paint94979/Picture379.flv">

 

[Kat]

http://static.photobucket.com/playe...et.com/albums/gg254/paint94979/Picture379.flv

Where is the rest of the video? Did the pedal stick to the floor again?

Edit I see you fixed it ...

 

[JoshH]

What's done to it? The Vette, I mean.