switchable tunning
- Thread starter LBZrcks
- Start date
I have installed files manually, no BETA
How bad is to run a race tune all the time ????
Way off topic for this thread....
how ever, race tunes are usually pretty strong tunes, the one I built you is a pretty heavy tune and I recomend it for the track or racing only.
LOL Running around with the race tune all the time is hard on tires!
my bad i just base my post on this so i thought it ll be ok
so anyway i was asking to know how bad can it be on the tranny or on the engine since my body was asking me the same question
and i know that tune you build me is Bad A$$ i wont be running it arount :hug:
When I has issues we uninstalled EFILive and reinstalled it, but I don't know if we just used 87 to reinstall or if we had to update what we got off EFIs web site.
We will see if the next full installation of EFILive will cure the error issues.
Here is an update on the DSP project.
We have completed the code entry for the LBZ DSP2 and DSP5 conversions for all known operating systems for these trucks, vans will follow shortly after.
What we have to do now is go back over and check to make sure EVERY change is valid and will not cause odd running situations (or worse, a dead ECM).
This will take 3 or 4 solid days at least, once done we will send the calibrations out to our Beta testers for a final test before public beta release. So, it is getting very close indeed.
One LMM DSP2 OS and is currently being beta tested as we speak, so if all goes well by the end of September we should have in public beta ALL DSP2/5 OS's for both LBZ & LMM.
Cheers
Cindy
Here is an update on the DSP project.
We have completed the code entry for the LBZ DSP2 and DSP5 conversions for all known operating systems for these trucks, vans will follow shortly after.
What we have to do now is go back over and check to make sure EVERY change is valid and will not cause odd running situations (or worse, a dead ECM).
This will take 3 or 4 solid days at least, once done we will send the calibrations out to our Beta testers for a final test before public beta release. So, it is getting very close indeed.
One LMM DSP2 OS and is currently being beta tested as we speak, so if all goes well by the end of September we should have in public beta ALL DSP2/5 OS's for both LBZ & LMM.
Cheers
Cindy
cool! Nice work, once again another home run by the efilive crew.
I Just need to get a tune made and a switch installed. This is good.
Sweet
Why do I love bumping this thread?
:rofl:
If you didn't, I would!!
Wait a minute........
Having trouble finding "free" pins so I need one for a sample I guess. I asked the service dept at the local GM and Chev dealers to see if I could buy a couple and they looked at me like I was re ta did.
I hope Brayden still has some kicking around for sale!
pm me for lbz ecm pins... i have ALOT of them right now.
If you didn't, I would!!
Wait a minute........
Having trouble finding "free" pins so I need one for a sample I guess. I asked the service dept at the local GM and Chev dealers to see if I could buy a couple and they looked at me like I was re ta did.
I hope Brayden still has some kicking around for sale!
I have a couple as well, I paid way too much for them though :rofl:
How much are they going for at the dealer? I have several thousand and I need to price them.