Called in at 4am to fix my helicopter. Hung start. Apparently it doesn't care for near negative weather.
What did you do at work today?
- Thread starter six5creed
- Start date
I drove around a small portion of Mid Michigan delivering brown corrugated boxes and packages and other assorted things to people.....just like I do every day. 
Continued erection on a new catholic church.
Sent from my SM-N910V using Tapatalk
Sent from my SM-N910V using Tapatalk
Are you hanging around altar boys again?
:roflmao::roflmao:
:roflmao::roflmao:
That is wrong in so many ways.:roflmao:
Oil cooler sprung a minor leak.. order a derale 54078
https://derale.com/products/fluid-c...-4-6-pass-dual-circuit-tube-fin-cooler-detail
Got one shipped to my door for $190.. picked up so straight and 90° fitting.. it's rated at 67KBTU verses the 29.5k each B&M cooler im running.. see how it goes with 2x the cooling and 1/2 the air flow
https://derale.com/products/fluid-c...-4-6-pass-dual-circuit-tube-fin-cooler-detail
Got one shipped to my door for $190.. picked up so straight and 90° fitting.. it's rated at 67KBTU verses the 29.5k each B&M cooler im running.. see how it goes with 2x the cooling and 1/2 the air flow
Close up of blending and picture of machine that does most of the work.
20,000rpm 5 axis milling spindle. 2 6000rpm main turning spindles, 1100rpm c axis on both. Lower turning turret with 6500rpm driven tools. Yes, she's a complicated gal
That thing is bad ass Waid:thumb:
Are you hanging around altar boys again?
ROFL...That is wrong in so many ways.
I was wondering how many would catch it.
On the serious side, going to be a nice building and have been having fun connecting iron on it. A few challenges with the weather we've had this past week, but still moving along.
Sent from my SM-N910V using Tapatalk
Tore this 5spd down, cleaned and inspected waiting on a kit from Evan
Sent from my SM-G900V using Tapatalk
kodyskruizer
Load in Detroit area hauling ass to Greenville SC to deliver in the AM.. some material/die feed rails for a large stamping press
Had the day off! Ha! :roflmao:
Drove an hour and a half to a job, get the key out of the combo box, open the front door and look at the black mastic adhesive(or asphalt) and the pile of 9" x 9" asbestos tiles lying on the floor. Close the door immediately and call the general contractor and tell him we can't work there today. Was frinkin pissed.
Erected four rafters at the church and made full pen welds at the peek. Decent day, cold cold with the wind blowing.
Sent from my SM-N910V using Tapatalk
Sent from my SM-N910V using Tapatalk
Montana and Idaho I 90 headed west
Somewhere in Middle of I 90
Butte
Can't see anything unlit in mirrors
Before cleaning side window and mirror
Lookout Pass
There is like 2 feet of snow on median cement divider.
Somewhere in Middle of I 90
Butte
Can't see anything unlit in mirrors
Before cleaning side window and mirror
Lookout Pass
There is like 2 feet of snow on median cement divider.
Man, be careful out there. :hug:
Hauling a transformer...I mean Thor's hammer
