Trying to find o ring part numbers - coolant leak

[monster50iii]

I'm trying to locate the correct oring for my coolant relocation fitting. The one behind the drivers side manifold. The guy at gm thought he found it, and said it was $32. I think he had the wrong one. Ive been searching now for 2 days and haven't found anything. Any help would be appreciated!

 

[Ron Nielson]

Get your vin# and then go to a GM Parts based website, input your VIN# instead of year, make, model, etc. This should get you only parts for your particular truck, options, etc.

Is 'coolant relocation fitting' a part that usually is present on LMM's? or is this some aftermarket part?

 

[ZeroGravity58]

2007-2010 GM Heater Inlet and Outlet Pipe Seal 94011614 GM | GMPartsDirect.com

2007-2010 GM part # 94011614 - Heater Inlet and Outlet Pipe Seal

www.gmpartsdirect.com

I think this is the one you want. Its the oring that goes on the hose that feeds the EGR cooler behind the manifold. Its also the same ones used on the plugs to block them off.

 

[JoshH]

The only coolant o-ring I know of that is anywhere close to $32 is the one that goes on the metal pipe between the water pump and the oil cooler.

 

[monster50iii]

Thanks Zero, that was the one I was looking for!