Help: suspention sugestions form dragracers

maine04max

New member
Dec 11, 2008
1,009
0
0
I take it there isn't a set rule for suspension setup on all trucks . I have gone back and read a few threads on caltracs stuff . before mine were set on lowest hole . clamps and ranchos on setting 9 .
I know my 20's are not helping me but I set caltacs on highest hole took off the clamps and lowered the shock setting a little.

anyone with suggestions with my setup and tire pressures?
 

IdahoRob

New member
Jun 5, 2007
1,151
0
0
Craig, I like running the clamps on the springs even with cal-tracs. Tires down to 25psi, Right rear shock set firm and left rear set soft.
 

JD4440

<< Lo-Carb Monster
Feb 27, 2009
1,776
1
0
Orlinda, TN
I moved mine to the top hole for this weekend. We'll see if it does any better. I don't have an overload so there goes clamping w/ the Caltracs
 

TrentNell

Finally underway !!!!!
Jul 7, 2008
7,543
0
0
44
slc tuah
I watched your vids Craig , the truck looked good on the launch from a suspension aspect , my bet is there was just not enough grip from the cold surface temps , try lower pressure , good move on moving the bars up , and Rob posted good advice on the shocks.
 

maine04max

New member
Dec 11, 2008
1,009
0
0
thanks for the input guys :thumb: Ill post back after tomorrow and let you guys know how it went