On top of engine the 2 big connectors won't come apart. I unlocked the little green tab in middle. then when i pull handle up to disengage, it still will not come apart. I took pressure off the connection and squeezed the ends at the same time. Still no luck. What am I missing. I hate to even ask but that's what these forums are for.
I have watched you tube videos but nobody gives a clear answer. Somebody has to know the trick!
Reason to disconnect is because I am pulling cab to replace turbo, down pipes, and since I'm that deep, water pump transmission lines, power steering lines and brake booster that are all leaking a little. I need to find a antifreeze leak and I'm 99% sure its the O ring on bottom of thermostat housing leaking down on the 4" hose behind the harmonic balancer. Then I may pull heads and do new head studs, gaskets and valve job.
Thanks in advance for any help.
I have watched you tube videos but nobody gives a clear answer. Somebody has to know the trick!
Reason to disconnect is because I am pulling cab to replace turbo, down pipes, and since I'm that deep, water pump transmission lines, power steering lines and brake booster that are all leaking a little. I need to find a antifreeze leak and I'm 99% sure its the O ring on bottom of thermostat housing leaking down on the 4" hose behind the harmonic balancer. Then I may pull heads and do new head studs, gaskets and valve job.
Thanks in advance for any help.