lowered truck pics
- Thread starter maine dmax
- Start date
Found out yesterday I guess plaza didn't level my torsion bars before aligning my truck like I asked so it's an inch off driver side to passenger side. Is an inch enough if I level it I'll have to align it again?
Stop fkn around and drop that thing! You already know how good it's gonna look!
I love those headlights. Did you do that yourself, or buy?
Sent from my iPhone using Tapatalk
Not REALLY lowered, but 2" shackles in rear. Front is cranked a little to match
Soon to be removing overload, and another leaf, and I'll let the front down to match
I love those headlights. You do it yourself, or buy them? Thanks!
Sent from my iPhone using Tapatalk
I dropped my t bars 5 turns below stock once and didn't get it aligned. I drove it like that for probably a year and didn't notice any negative effect, no tire wear or pulling. Don't know what would happen if you only dropped one side, I think you'd be ok with only dropping an inch.
Nitto 420 tire wear
Do the Nitto 420's wear down fast when towing? I just picked up some 20x9s and was going to run some 285/50R20s but worried about tire wear towing an enclosed car hauler.
Do the Nitto 420's wear down fast when towing? I just picked up some 20x9s and was going to run some 285/50R20s but worried about tire wear towing an enclosed car hauler.
If you tow every day I don't think this tire will work for you. If you haul your trailer a few times a month you'll be fine.
they look better then I thought they would
22x9.5 with 285/45/22 420s stock torsion bolts removed and drop shackles in the rear
Thanks. Nah I had em done through www.fastheadlights.com
They're fixing to go back for more goodies too!
My trucks about done and I'm gonna need some shocks. I want the rancho 9000s based on reading, but what is the length or part number I need for slammed t bars and 3 inch drop shackles? Or should I measure and call rancho?
They are zero help, unless you are lifted they can't tell you a damn thing. I just went on amazon and found the ones with the least amount of overall length. Iirc the shortest you can get is 2" shorter than stock.
I got the 9000xl.
I'll get the part #'s but the ones I got didn't fit right away... fronts were fine but I had to drive out the bushing sleeves for the rear ones, some might say that's not right bit they are just fine now, I might just get accelerated bushing wear in the rear.
I could not find any dimensions for mounting holes for them that was why I ended up with what I got bit I'm happy
Edit: RS999029 and RS999113
I'll get the part #'s but the ones I got didn't fit right away... fronts were fine but I had to drive out the bushing sleeves for the rear ones, some might say that's not right bit they are just fine now, I might just get accelerated bushing wear in the rear.
I could not find any dimensions for mounting holes for them that was why I ended up with what I got bit I'm happy
Edit: RS999029 and RS999113
Last edited: