intercooler pipes

[Large1]

has any one made there own intercooler pipes ? i have been thinking it could be done . thinking of 3 - 3.5 " but dont know if its worth the time just looking to move some more air ( egt reduction )will be upgrading the wheel in my s300 to the 66mm soon hopefully and was wondering were else i can gain while i'm at it ?

I have thought about doing this as well

 

[JoshH]

Does anybody have the part number for just the hot side banks tube lly? I know the number for the tube and boot 25936

Thanks

When I talked to Jeff Barker at Banks he told me they no longer sell it as just the tube. Maybe I'm not important enough to buy it that way though.

 

[othrgrl]

When I talked to Jeff Barker at Banks he told me they no longer sell it as just the tube. Maybe I'm not important enough to buy it that way though.

Must not be.... lol. I just ordered 3 driver's side tubes and 1 passenger side tube the other day, and ordered 1 driver's side with boot and clamp too.

I can get the banks tubes for you guys. The tube alone is $90 per side. For the driver's side tube with the T-bolt clamp and boot it is $150. For stock turbo guys I have mostly been ordering just the tube and getting the 3"-2.5" boot and 3" T-clamp elsewhere and can do that for $135.

 

[lotsofmiles]

When I talked to Jeff Barker at Banks he told me they no longer sell it as just the tube. Maybe I'm not important enough to buy it that way though.

Must not be.... lol. I just ordered 3 driver's side tubes and 1 passenger side tube the other day, and ordered 1 driver's side with boot and clamp too.

x2

I must be special

 

[fatboylmm]

I did both the compressor to the ic and from the ic to y-bridge out of 3-" not sure on gains though not finished with the rest of the compounds install

 

[skintback]

I got the boot 2.5-3'' but it's a inch shorter then the stock one is it going to work?

Still wanting on the tube

 

[Diesel Technology Source]

Ill be dynoing my truck along with another stock LBZ With efi live tuning on monday. We have the ic pipes from the turbo to ic from banks. And ill post the hp and tq increse if there is any. Im also doing the same on a lly with trans and efi live ill post those results as well.

 

[skintback]

tube only # 42328

 

[SSchmi5519]

Although not the cheapest route, others are making them as well. I just did a 3" SS LB7 to S480 today! The pic is for a LBZ 3" SS to stock turbo.

At $275, its not the most expensive either!