How quick/fast is 500hp in the 1/8th?

paint94979

Beer Nazi
Sep 18, 2006
11,742
33
48
39
Curious what a 500hp CC, LB will do in the 1/8th.

Lots of variables, but id say between 8.10-8.20 ET. There are lots of different factors though some 500 hp trucks run fast than others for some reason. What is your truck weight /w driver?
 

TrentNell

Finally underway !!!!!
Jul 7, 2008
7,543
0
0
46
slc tuah
60 ft is far more crutial in the 1/8 dont have the big end to make up any errors . but paint's guess was a good one might be .1-.2 higher if you cant launch well .
 

fast03

Active member
Jun 15, 2008
1,201
6
38
62
Rancho Cucamonga
Should launch ok I have had 1.9 60's in the quarter. I will hopefully dial in the launch tonight, like to see some 1.8's
 

MMLMM

Tunergeek
Mar 2, 2008
4,086
2
38
44
Reno, NV
www.dyncal.com
I went 8.09 @ 84.48mph - 1/8 mile with a 1.74 - 60' at LVMS on heavy ass 20" wheels and tires...on a tune that dynoed at just over 500hp
 
Last edited:

Bentley

Doesn't know $hit...
Mar 7, 2008
193
0
0
Under a big a$$ rock...
I went 8.09 @ 84.48mph - 1/8 mile with a 1.74 - 60' at LVMS on heavy ass 20" wheels and tires...on a tune that dynoed at just over 500hp

When I was at LVMS for a midnight madness event I could NOT hook! I was 13.5-13.7 all night with massive wheel hop on every launch... How did you hook?

Sorry for the hijack...
 

Josh2002cc

That Uncle
Apr 2, 2007
1,832
0
0
41
I have a shortbox and my best time was 1.77 60' @ 8.00 1/8 with a weight of 6980lbs
 

fast03

Active member
Jun 15, 2008
1,201
6
38
62
Rancho Cucamonga
Thanks for the replies:) I ran last night and had some issues. Ran the tires at 30psi front and 32psi rears. could not get around the water box so on launch truck spun>defueled then hooked. I need to practice staging as I pushed through the brakes 2x. Best was a [email protected]. Best 60 foot was 1.9. Don't know if it hurts or not but I was still running #1 diesel from Colorado trip. I think there is a 8.3- 8.4 in it easy if I can get it to hook.
 

JoshH

Daggum farm truck
Staff member
Vendor/Sponsor
Feb 14, 2007
13,862
966
113
Texas!!!
Try lowering your rear tire pressure more. I usually run 30 front/25 rear.
 

MAXLLY

No Lemming Here
Aug 15, 2007
1,063
0
0
San Diego
Thanks for the replies:) I ran last night and had some issues. Ran the tires at 30psi front and 32psi rears. could not get around the water box so on launch truck spun>defueled then hooked. I need to practice staging as I pushed through the brakes 2x. Best was a [email protected]. Best 60 foot was 1.9. Don't know if it hurts or not but I was still running #1 diesel from Colorado trip. I think there is a 8.3- 8.4 in it easy if I can get it to hook.

Take a look at your brake pads and power steering pump, they'll help the push.
 

duramax215

Team Jacoby
Dec 17, 2008
456
0
0
38
Waubeka, Wi
i'm not near 500 hp but i'm going to play with tire pressure tomorrow i ran tonight in 1/4 and i limped tranny at end but my 1/8 mile was 9.0 with a 220 tune in it with a 1.9 60foot my t-bars are lowered and i'm also going to run spring clamps.
 

paint94979

Beer Nazi
Sep 18, 2006
11,742
33
48
39
i'm not near 500 hp but i'm going to play with tire pressure tomorrow i ran tonight in 1/4 and i limped tranny at end but my 1/8 mile was 9.0 with a 220 tune in it with a 1.9 60foot my t-bars are lowered and i'm also going to run spring clamps.

Your gonna limp again unless your transmission is built