Congrats Elvis!!! Turn the spray up and let it eat brother!!! Evan is the man when it comes to these tranys, best guy to have in your corner for sure!:thumb:
DRAG & BRAG Videos
- Thread starter prostreeter600
- Start date
We shall see Mark . I’m planning on doing a rear wheel burnout next time . It should 60’ in the 1.30s and get me a lower 6.1 or 6.0 just like it is maybe after that I bottle feed it a tad more . Lol 
. Let’s Not Forget to give Mark Broviak credits for the tuning . Thanks For The Bad Ass Tuning Mark !!!!
. Let’s Not Forget to give Mark Broviak credits for the tuning . Thanks For The Bad Ass Tuning Mark !!!!
I have my bottle warmer set to 950 PSI . I automatically shuts off when the pressure hits 950. I go off of NOS recommendations, I’m no expert by any means . That was the 1st time I sprayed the truck ever .
Any idea what it is at the end of the pass?
I wander what others run their pressure at? Back when we ran nitrous on the mountain motors we would aim for 12-1300 psi.
Wow . That’s on up there . I’m sure that your bottle had to stay pretty full . I have a 15# bottle with a high flow valve that I run with a 6AN line all the way to the Solenoid. Not sure what others run on their diesels .
Second gear launch is where it’s at! I’m guessing 9.4x before the end of the year with a big jet! San Antonio guys better watch out come December!
You don’t want your bottle pressure anywhere near 1300 that high it hurts not helps and is rough on solenoids you’re perfect at 950-1000.
This is more of a test launch instead of a drag race . I’ve been super busy this year and have had to fix a couple of issues. This is current status. Hoping to make some runs as soon as I can get to a 1/4 mile test and tune . This is on Tune 5 @ 35# Boost with 7 psi on rears and 24 psi on fronts , 2nd gear launch in my 150’ driveway . It seem to hook till it either hit fluid couple or got on my auto lock then it just spun em. It should hook solid on the track. https://m.youtube.com/watch?v=0K0U7200_Sg
These tires do wrinkle
I setup a camera on a tripod to check and see if the tires were wrinkling or not . This is what I found .
I setup a camera on a tripod to check and see if the tires were wrinkling or not . This is what I found .
