Brakes won't hold when spooling up? Help please!

[NemesisDP]

This is on the 02. When I get to 5psi of boost it starts to roll forward. I seen along time ago on another forum but can't find it.

THANKS

 

[LBZ DMAX]

replace the brakes...????

 

[dmaxlover]

Even know the 5 star is a pretty tight converter, I agree with LBZ DMAX, your brake are probably due for an overhaul.

 

[beach_33]

make sure that you pump the brakes before you try to stage

 

[NemesisDP]

Brakes are good, but I think I will put SSB brakes and pads on it.

dmaxlover when I brought the truck a couple of people thought I had bought your truck or Wades truck.

 

[dmaxlover]

dmaxlover when I brought the truck a couple of people thought I had bought your truck or Wades truck.

That's funny. I've heard that before.

 

[McRat]

Start in 2nd. Problem disappears.

In general, if you are "creeping" with good factory brakes, you are about to launch too hard and go into wheelhop.

 

[LBZ]

Start in 2nd. Problem disappears.

In general, if you are "creeping" with good factory brakes, you are about to launch too hard and go into wheelhop.

Maybe this is why I don't get wheel hop. I spool till it creeps and then back it off a shade. No hop or pull.

 

[hondarider552]

i have talked to nwtdiesle on here that if you pump your brakes like 10 time they will hold a little more than without pumping. i tried that and it seems to work