Help: Bottle test Its leaking help please

[onesmokinduramax]

I just done the Bottle test And as soon as i started my truck up it sprayed about a inch in the bottle. I took it on a short test drive didnt even go a mile and pulled over to cheek it and fuel was over filling the bottle. I didnt even get to get on it hard...

So now my question is do they make a high flowing Fuel Pressure Relief Valve? I do not want to put a race valve in it...

 

[Cougar281]

Since youre is leaking like crazy, I'd guess your best bet, if you don't want the race valve, would be to get a new FPRV and shim it, since it's been said that once it starts having issues, shimming won't help.

 

[McRat]

Naw, if it's leaking, put in 3 shims. You'll be good. That's how "Blue" has been running for 3 years.

 

[Cougar281]

Naw, if it's leaking, put in 3 shims. You'll be good. That's how "Blue" has been running for 3 years.

I stand corrected

 

[McRat]

I stand corrected

You are right though, once your PRV leaks, it gets soft for some reason, and you must get more aggressive.

 

[onesmokinduramax]

Naw, if it's leaking, put in 3 shims. You'll be good. That's how "Blue" has been running for 3 years.

Where can i get the shims at? How hard is it to do?

 

[LarryJewell]

PPE sells them, or here's a DIY thread that tells you how/what size washers to get

http://www.duramaxdiesels.com/forum/showthread.php?t=267

 

[onesmokinduramax]

Thanks for the info. Im going to try to do the shim next week... Ill keep ya up todate on what the out come is