Best engine mounts?

turbovan

Too many toys!!!
Mar 4, 2018
145
20
18
Abbotsford, BC, Canada.
Mine are original and sagged and at 480K, my friend who drives like an idiot has torn 2 sets of GM mounts-the rubber seperated from the metal bracket.

I drive sanely, no burnouts and tow. Will I be ok with the GM mounts or any other suggestions. I've seen some of the HD mounts and yeah, I like my teeth not rattling.

TIA.
 

PureHybrid

Isuzu Shakes IT
Feb 15, 2012
3,281
336
83
Central OH
If you aren't loading up the engine doing 4wd launches a new stock one will be fine. Not sure if the genuine GM are any better or worse than aftermarket ones. When my drivers side ripped apart I just Por patched it back together, drilled and bolted it
 

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,065
4,736
113
Phoenix Az
From stock hp to well over a 1000hp, you can’t beat a bolted stock mount. Adds 0 vibrations to the chassis beyond what any stock mount would add and it’s cheap.
 

1TRIKHD

Country boy Limo.
Sep 15, 2015
1,658
338
83
P.N.W
From stock hp to well over a 1000hp, you can’t beat a bolted stock mount. Adds 0 vibrations to the chassis beyond what any stock mount would add and it’s cheap.
This is what I'm doing with my motor when it's done.

Sent from my SM-S906U using Tapatalk
 
  • Like
Reactions: turbovan

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,065
4,736
113
Phoenix Az
My friend tore both, lol. He can break stuff we only dream off.
same on my old truck but a torn driverside will eventually take out the pass side. also, high load reversing can take the pass side out as well.

i bolted the driver and left the pass side factory when i replaced them.