4th Gear Pulling
- Thread starter whitey
- Start date
Yes.
What gear's and tire size do you have?
I don't think you have enough ponies to run 4th! Maybe if its a real loose track.
751! :d
Last edited:
Last edited:
Last edited:
Last edited:
Can u attach one with 3rd & 3.73's with 35's and one with 3rd & 3.42's with 35's... But at 3500 rpm
IMHO you would be better off with 3rd gear and 35" tires with that gear ratio. I pulled with 4.56 gears with around 700hp and in 4th gear still had to unlock the converter at the end. This was on very tight ohio clay tracks. I tried 33" tires with same results. Not enough HP's plain and simple.
What happens if converter is not locked?
Build lots of heat in your tranny and converter.
No wheel speed. A well coupling convertor may do alright but you'd be peeing into the wind with no lock up. You're in that no mans land as far as your gearing. 4.10 is too low for 3rd gear and too high for 4th. What size tire?
The easy way to find out is to give it a try if your on the fence.