2003 C&C LB7 ZF6

[1FastBrick]

That was a leaky pile...

 

[dmax_ty]

Oh my hell, right? Now I hope that I got a good six bolt unit. Still waiting on the hot side intercooler pipe to show up.

 

[dmax_ty]

Having a strange stalling issue. A couple months ago, the truck died and wouldn’t start/idle hardly at all. Chased down a couple of things and found the crank position sensor was toast. Replaced that and since, have an intermittent misfire and stall. Will happen when the truck is hot, no CEL or any thing out of sorts as far as DFRP and AFRP when logging with my V2.

Thoughts?

 

[dmax_ty]

Finally decided to throw ALL the codes.

P0090
P0101
P0102
P0193
P0205
P0335 - this one has me concerned. I’ve replaced CPS a while ago. Hopefully the reluctor isn’t loose.
P0374
P2066
P2149


Need to run some diagnostics. Seems either the CP3 is weak, bad FPR, weak FRPR valve, and on and on and on.

Sonuvabitch.

 

[2004LB7]

You probably have a chaffed harness or something. P0205, P2149 and P0375 are probably your miss and stalling

 

[dmax_ty]

That’s my initial thought. It’s not easily repeated. It shut right off yesterday and wouldn’t run (P0335), but today, no problems. I’ll start chasing wires.