turbo

  1. 715Hunter

    Piston rings not seating

    Completey new here, just been reading posts as a non-member for a long time. Anyone have experience or advice on how to get rings to seat? Really, really don't want to pull my engine back out and have the bores re-honed. I just finished re-installing the engine in my truck. It cracked a piston...
  2. W

    Laggy 65mm Turbo

    I have an LBZ that I am struggling to get clean, decent driveability with. It has a 65mm wold fab turbo on it. Does anyone have any experience with this specific turbo? I've checked for boost leaks and don't have any, is it possible to have an exhaust leak that I can't hear? I haven't looked too...
  3. RMJ_LB7

    LB7 Performance Engineering 68 drop in turbo

    Has anyone ran a Performance engineering drop in 68mm turbo for the LB7? The price is insanely good and curious since I have never heard of the company before.
    • RMJ_LB7
    • Thread
    • 68mm drop- lb7 performance engineering turbo
    • Replies: 0
    • Forum: Turbo Talk
  4. Lb7x2

    Lacking Power 2001 LB7

    First post on this forum just looking for some help to describe my lack of power on my 2002 LB7. So I’ve got two LB7’s 2001 and 2002. The 2002 seems to have more power and boost than the 2001. Seems like the 2001 really works a lot harder to get itself moving along, although it does have...
    • Lb7x2
    • Thread
    • duramax fuel head gasket help injector lb7 power turbo
    • Replies: 16
    • Forum: LB7
  5. wyd_open

    Question: Turbo spool

    I have a Banks 6 Gun on my 06 crew. At idle, it sounds like my turbo spools up for no reason. And as I drive down the hwy, holding a steady foot on the pedal, my boost goes from 3lbs to 7lbs. Back and forth. Not sure the issue.
  6. S

    LLY: Turbo codes present.

    I normally work on Ford Diesels in my shop, so bare with me! I would greatly appreciate any tips/help/info! A customer really wanted me to tackle this project as his warranty is out. I installed a new fuel injection pump....everything went well. I got it back together, drove it and it's...
  7. nate roop

    Help: New turbo and still pouring oil out exhaust...

    ok so the front seal went out on the stock turbo,(blowing oil in intake and smoking like a freight train constantly):mad:, so i ordered a htt s366 and got it installed at a shop that turned out to be a joke(not gonna name bash) but anyway, its still blowing oil in the intake and smoking...
  8. dmaxerLLY

    stock LLY turbo dimensions. looking to upgrade on a budget.

    before i get blasted.. yes i tried searching with 0 results. im a DIY guy i can mig, tig and fabricate everything neccessary myself. ok im assuming T3 on the turbine inlet flange of the stock turbo? i would love to stuff a s466-83/74 1.0ar in the lly with an adapter flange to T4 if its...
  9. S

    turbo issue HELP

    I have a 6.6 Ltr duramax engine with turbo issues. the turbo making a whining noise when i accelerate and when i take my foot off , i think its called spooling anyway the problem im having is the turbo is making this noise but the turbo doesnt seem to be kicking in at all, the engine...
    • stevie
    • Thread
    • duramax duramax turbo turbo
    • Replies: 4
    • Forum: Turbo Talk
  10. S

    duramx turbo issue

    I have a 6.6 Ltr duramax engine with turbo issues. the turbo making a whining noise when i accelerate and when i take my foot off , i think its called spooling anyway the problem im having is the turbo is making this noise but the turbo doesnt seem to be kicking in at all, the engine managment...
  11. Brayden

    Cast Stainless T4 Pedestals Anyone?

    Here's another Iron in the fire... Literally :eek: This has been on the back burner for a while since the Cheetah's don't require one. Brayden
Top Bottom