Search results

Search the forum Search Articles
  1. SoCalMike

    Factory vs cognito/kryptonite UCA's?

    When I was running H2's 285/70/17 and Cognito tubular UCA's, my tires would rub the UCA's on full lock left or right. I cant remember if I was at stock height or "leveled" though.
  2. SoCalMike

    Factory vs cognito/kryptonite UCA's?

    Are you guys running factory wheels?
  3. SoCalMike

    Factory vs cognito/kryptonite UCA's?

    If stock is working for you, I would probably stick with it. IIRC when I was running H2's and stock UCA's they were close to touching. Like 1/4 inch close. But it worked. I think you will rub with aftermarket UCA's. Not only that but when you turn to full lock you might rub the UCA also.
  4. SoCalMike

    LBZ Drivers side Dipstick ??

    This thread is old but when you do a Google search for "Duramax driver side dip stick" this is one of the first ones that come up. I'm just starting to do my head gaskets and I bought a bunch of parts to install while doing them. The driver's side transmission dip stick tube was one of them...
  5. SoCalMike

    Drivers Door Pwr Window Switch Issues

    I agree. Sent from my SM-S928U using Tapatalk
  6. SoCalMike

    Drivers Door Pwr Window Switch Issues

    Have you tried to charge the battery? Also, I had a similar problem with my LBZ seat. One of the seat functions would not work for some reason. I disconnected the batteries for a couple minutes, reconnected them and everything work again. you might give this is a try after you charge the battery.
  7. SoCalMike

    TrakMotive XTENDED Travel CV Axles GM-8026XTT 2500HD

    No issues there either. But I do have a 4 inch Cognito lift Sent from my SM-G996U using Tapatalk
  8. SoCalMike

    TrakMotive XTENDED Travel CV Axles GM-8026XTT 2500HD

    They are star shaped. But the after market ones I had before were round. Both worked fine and no issues. Sent from my SM-G996U using Tapatalk
  9. SoCalMike

    Duramax 4WD Issue

    Have you checked the ground wires? Do you hear the encoder motor trying to switch when you go from 2wd to 4H? Ground wires are under the drivers door on the frame. Make sure they have good contact. Take them off and clean them to make sure. You can also check voltage at the actuator connector on...
  10. SoCalMike

    More tire pressure info please

    I use a website called tire size.com to see what tire pressures to run. I'm on 35x12.5r17 and run 34 front 30 rear. Sent from my SM-G996U using Tapatalk
  11. SoCalMike

    TrakMotive XTENDED Travel CV Axles GM-8026XTT 2500HD

    I didn't read the whole thread but I am running them. Works good and so far no issues. Recently I checked RockAuto and seen that the part numbers that I previously bought and the part numbers that are current are no longer the same Sent from my SM-G996U using Tapatalk
  12. SoCalMike

    Weird elec stuff. Door/radio related

    It might be your door lock actuators. I believe they are tied into the interior lights and radio. On my truck they act up also. When I have issues I usually mess with the door latch and you can see the radio or lights turn on or off. Nevermind. I saw that your replaced them already.... Sent...
  13. SoCalMike

    More time online

    I was driving down the 91 about a 2 weeks ago and saw the Raymond exit...... Made me think of Mike and the visits to his shop. I'm glad that we still have a reputable shop local to us even though I not really local anymore since I moved. But still close enough to make the drive if needed. If I...
  14. SoCalMike

    2007 Silverado 2500 HD Crank No Start

    My stock fuel filter head started leaking and I removed it. I have a Fass system on the truck and never had any problems since Sent from my SM-G996U using Tapatalk
  15. SoCalMike

    Torque Converter Questions

    Never heard anything from my R Mike installed 3 years ago. Guess I'm one of the lucky ones. Sent from my SM-G996U using Tapatalk
  16. SoCalMike

    Best PreBuilt Transmission Brands

    I'm not if Inglewood has been recommended. That's who I would go with if I had to rebuild my Inglewood transmission again. Sent from my SM-G996U using Tapatalk
View older results
Top Bottom