Search results

Search the forum Search Articles
  1. bcdeutsch731

    sawmilldmax 1969 C10 build

    I'm posting some pics for sawmilldmax. He has an amazing build going right now. I'll let him answer questions. I'm just posting some pics for him. Sent from my XT1254 using Tapatalk
  2. bcdeutsch731

    Up in flames!

    As some may have heard or seen, my race truck went up in flames on my second pass at Byron Dragway this past Saturday. I know the fire started at the rear of the engine and continued to the left side of the motor, burning up to the rear of the transmission, through the firewall to all the wires...
  3. bcdeutsch731

    8.395 @ 168 mph!!

    Thought I would start my own thread because we were kind of cluttering the top 500 fastest dmax list. LOL Never had I thought I could break an 8.50 in the 1/4 mile let alone come close to a 7 sec pass. I know I'm still a long ways away from a 7, but with help from some great sponsors it might...
  4. bcdeutsch731

    Video of 8.55@161mph run

    https://www.youtube.com/watch?v=iUfrR37-Olo Big thanks to my family and sponsors Wife and Kids Parents Danville Performance HSP Diesel Wagler Competition Bullseye Power Neal Chance Racing Converters Mayeda Motorsports FlexiCorps Racing Deutsch's Truck Repair
  5. bcdeutsch731

    8.62 @ 161 video

    https://www.youtube.com/watch?v=LZmkfdr9LQs Went to Byron Dragway with Mark Broviak on Saturday and first pass out I ran a 8.62 @ 161. This is the first time I have run my truck on the big tune. Mark made some changes and I ran again but stupid me forgot to turn the lift pump back on after...
  6. bcdeutsch731

    Byron, IL Diesel Drags Oct. 25

    Who's going this year? Byron Dragway Oct. 25 gates open at 9 and racing starts at 10. I have the truck all ready to go! Mark has been playing with the tuning and we're going to see how close to an 8.5 we can get. Hopefully the temp will be warm enough to get some traction. See you guys out...
  7. bcdeutsch731

    Stripped motor down yesterday!

    I went to Danville Performance yesterday and stripped the engine down with Mark and Matt. The engine has two seasons on it. I have close to 200 quarter mile passes on it and about 4000 miles of hard street use. I ran Fingers cast pistons, SoCal stg.1 heads and a 3388 regular fire cam. The truck...
  8. bcdeutsch731

    HSP Triples

    First off I have to give a big thanks to HSP Diesel Danville Performance Bullseye Power I went to HSP Diesel and picked my truck up today. Joe, Dave and the HSP crew are very professional and did a great job on my truck. Joe and Dave kept in contact with me and took everything I wanted...
  9. bcdeutsch731

    This is a good one!!!

    A 6.5 came into the shop and they said the truck was not running good and another shop had just put a new inj pump on the truck and they wanted us to set the timing on the pump. We set the timing but the truck still ran like crap. We were doing are normal checks on the engine and found this. We...
  10. bcdeutsch731

    Dragstrips that are open in the winter

    Looking for a track to do some T&T at before I pull my motor out and look it over. Anyone know of some tracks that are still doing T&T. Trying to stay within 12hrs of Chicago. Montgomery Motorsports Park in Alabama is still open. Anyone ever race there and if so how was track prep? Thanks
  11. bcdeutsch731

    1972 K5 Blazer LBZ

    We are going to start on this project this weekend. It's a 1972 Blazer that belongs to my dad. He bought a rolled 06 LBZ truck and we're going to take the complete frame and drivetrain and put the blazer body on it. Our goal is to be able to pull my truck to the track with his blazer. I have no...
  12. bcdeutsch731

    Made it into my first Magazine

    I would like to thank Chris Tobin for a great article and pictures. This is the first time my truck has made it into a magazine in the 4 years it has been done. It's in the January 2014 issue of Diesel World.
  13. bcdeutsch731

    Allison converter bolt pattern?

    What is the bolt pattern on a Allison 1000 converter? I know it has six bolts but are they 6x11.5? Thanks Brett
  14. bcdeutsch731

    Byron Fall Diesel Day Oct. 26th

    Who's going? There is always a good turn out to this race.
  15. bcdeutsch731

    Datalogger anyone using one?

    I'm looking to install a datalogger in my truck and was wondering if anyone has had good luck finding one with all are needs. I would like to record RPM Batt. Voltage atmospheric boost high pressure boost drive pressure turbo shaft speed rail pressure G-meter coolant temp oil temp...
  16. bcdeutsch731

    New World Record

    Thought this was pretty cool. I know it won't last long, but I will take it well I can. Big Thanks to Deutsch's Truck Repair Danville Performance Brians Truck Shop
  17. bcdeutsch731

    Electric 10 Bar map sensor.

    Anyone know where I can get one, that actually works with the PCS controller? I have a PCS controller on my truck for the 4r100 and I'm looking to data log my boost and back pressure. I see around 80psi of boost and about 110psi of back pressure. I tried looking for one but most say they will...
  18. bcdeutsch731

    finally got my wish (Pic inside)

    I spent all day at Danville performance tuning my new transmission and after getting all the trans stuff dialed in we dyno'ed the truck again. On the small race tune it made 960hp and on the big race tune it made 1105hp. I went to the track after and ran it on the 960 tune. I was only able to...
  19. bcdeutsch731

    Look at this RACK

    I love Illinois Buck's, after hunting for three days straight with my bow i just could not get anything in range. First day of gun season this monster walks in 35 yards in front of my stand. I wish I had my bow, but its still nice to get one this size no matter what you use.
  20. bcdeutsch731

    New Best 10.69 @ 126mph

    Went to Byron Diesel Shootout on Saturday and ran a new best of 10.69@126mph with a 1.51 60ft time. The best 60ft of the day was a 1.48sec. I made 5 runs 10.69, 10.71, 10.71, 10.72 and a 10.78. I'm done racing for the year and looking forward to tearing the truck apart and installing the built...
Top Bottom