Recent content by 68skylark455

  1. 68skylark455

    2010 LMM Fuel Temp sensor

    I did. It's good. Weird thing happened. I checked all the wires from the exhaust sensors that were removed and found the sensor for the two hoses was still plugged in and appeared to have water in it. Unplugged it cleared codes and just for giggles reinstalled the tune. Truck runs awesome no...
  2. 68skylark455

    2010 LMM Fuel Temp sensor

    Customer had some issues with a harness and pulled some wires and stuck them bac in and was never able to get them right so he installed a new harness to the PCM. I keep getting a P0183 Fuel Temp Sensor Circuit high and first I replaced the sensor then I have checked the wires and the yellow has...
  3. 68skylark455

    M-21 Rebuild Kit

    Transmission Products Inc 490 W 2nd St Tucson, AZ 85705 (520) 884-7134 They built our nascar late model transmissions for us, had a nice kit to convert the front output bearing to a bigger better roller bearing as well
  4. 68skylark455

    Let's see your engines

  5. 68skylark455

    ? For self employed members

    Well that insurance is cheap compared to us folks out here :happy2:Since January ours went from $169 per two weeks to just over $420 per two weeks and I am self employed while my wife is a nurse and works for a clinic that provides our insurance haha sorry rips us off for our insurance. Blue...
  6. 68skylark455

    OT: Can someone school me on Automotive A/C?

    one other area always overlooked is the space between the condenser and radiator. we find a bunch of them filled with grasses and wheat stalks from the farm roads around here.
  7. 68skylark455

    OT: Can someone school me on Automotive A/C?

    The dryer/accum is also susceptible to humidity, if it's opend and very humid is draws in moisture quicker than brake fluid as it is designed to absorb moisture, most often we just change them, 4-5 years old has been a rule of thumb if it's opened and in that range of age replace it. As said...
  8. 68skylark455

    OT: Can someone school me on Automotive A/C?

    Yes the expansion valve is over complicated but when working actually can give you temps cooler than a fixed orfice. Best way to diagnosis one is to look at the pressures. With the gauges hooked up observe the low side at idle and on accel and at 2000 rpm. If it has some trash in it or is...
  9. 68skylark455

    707HP/650ftlb Dodge Challenger

    Actually if it's anything like what we built here on the 08 with 801 rwhp it's damn fun to drive and hasen't seen the tail lights of any camaro or mustang and we added a cage bigger wheels and lots of sound insulation so the 4200 is now closer to 4800 and it still kicks ass. Yes I know there is...
  10. 68skylark455

    Question: Value??

    Wondering what y'all thought would be a fair price on the engine, trans/transfer case, harnesses, basically complete minus the truck itself on a 2005 4x4 rollover with 86,548.?? They said it runs great but I haven't heard it or checked it out yet.
  11. 68skylark455

    Blackie finally broke BIG this time lol

    He saw them at a nascar race in a ford f650 custom truck. They have several different styles but he likes the wide back versus the wrap around stock ones and they come with or with out the seat belts made in them like factory, 6 way power, 6 way massage, heating, cooling and several different...
  12. 68skylark455

    Blackie finally broke BIG this time lol

    I still need to wash and detail her for him. I have been driving her to work this week making sure all the bugs are worked out before I deliver her to him. The headliner we did is leather to match the new seats we put in. They have all the bells and whistles like heaters, a/c, 6 way power...
  13. 68skylark455

    Blackie finally broke BIG this time lol

  14. 68skylark455

    Blackie finally broke BIG this time lol

  15. 68skylark455

    Blackie finally broke BIG this time lol

    I will post some up for you. I haven't washed it yet :roflmao: let me send them to my pc so they don't blow up the page lol. I haven't figured out how to make them smaller with the taptalk app yet I'm old haha.
See more
Top Bottom