Recent content by 57ringo

  1. 5

    How to remove oil cooler elbow???

    I put it all back together yesterday and only a few skinned knuckles later, it was done and no leaks now.
  2. 5

    How to remove oil cooler elbow???

    I took the glow plug relay off and reached down behind the engine and took 1 bolt & 1 nut off so I could remove the bracket and got the line out of the way. Next I had to remove a stud that bolts the transmission to the adapter plate ( bell housing) so the elbow would clear.....it was sticking...
  3. 5

    How to remove oil cooler elbow???

    Does that pipe go to the EGR cooler?
  4. 5

    How to remove oil cooler elbow???

    I've got a 2007.5 cab & chassis duramax that the elbow on the oil cooler is leaking so I've got the 5 bolts out that hold the oil cooler on but on this one, there is a pipe that bolts to the top of the elbow running up the back of the engine with 1 bolt and with the bolt removed, it's held in...
    • 57ringo
    • Thread
    • Replies: 6
    • Forum: LMM
  5. 5

    1992 Kenworth T800

    57ringo submitted a new Showcase Item: 1992 Kenworth T800 Read more about this showcase item here...
  6. 1992 Kenworth T800

    1992 Kenworth T800

    1992 Kenworth T800
  7. 5

    LML hole in the block, LMM short block swap?

    Do any of you know someone that has done this that I could talk to?
  8. 5

    LML hole in the block, LMM short block swap?

    Would you elaborate on what all needs to be changed? I have an LMM short block on the engine stand I rebuilt putting in Mahle race cast pictons, balancing & keying and would like to use it but if it's going to be somewhat cobbled up to us it, I'd rather find another LML.
  9. 5

    LML hole in the block, LMM short block swap?

    Iowa LLY, are you saying LMM short block wont work then?
  10. 5

    LML hole in the block, LMM short block swap?

    Do the turbo drain and feed need modified......something that can be done neat?
  11. 5

    LML hole in the block, LMM short block swap?

    I'm looking at a 2012 duramax with a hole in the block. Do I need to find another LML or can I use the short block or long block out of the LMM I have already?
  12. 5

    upgrade hydro-boost?

    The hyro-boost on my LMM is leaking and I need to change it. I viewed a video on youtube showing a guy putting one from a 2011 model on a 2005 truck saying it was an upgrade, better and cheaper than the stock one. Is there any fact to this? https://www.youtube.com/watch?v=IDxso037Cf8
  13. 5

    New to me truck, EFI Live installed already?

    previous owner had no idea ...was just a young cowboy on a ranch..owned the truck for a couple years. It just had the cable in the glove box was all I found.
  14. 5

    New to me truck, EFI Live installed already?

    I just bought a 2007.5 3500HD 4x4 dually. The owner said it had no tuner installed on it that he knew of. It had a straight pipe exhaust though and in the glove box was a FlashScan V2 OBDII Cable and it seems to run pretty good. Is there anyway to find out what tune it has on it?
  15. 5

    C5500 engine question?

    Is a Duramax out of an Express van similar to the pickup or is it different like the 5500
See more
Top Bottom