Installed a new tig welded water pump.
"OFFICIAL" What did you do to your D-Max today?
- Thread starter Hot COCOAL
- Start date
Stuff Done
60 hp BD injectors, heads & ARP studs, PPE manifolds, up pipes & MBRP down pipe, EFI Live Tune w 5 knob, Sinister Diesel intercooler pipes, AFE Turbo neck inlet, 150ghp FASS lift pump, new Suncoast 6sp, torque converter, Fabtech Tie Rod ends, Edge Insight Monitor, new water pump & starter, hoses. Awesome Aluminum Bash Bar by Bandit. So now to do the "$5 dollar bill on the dash trick" that the Corvette guys do, I have to first tape it down to the dash. 'Cause it'll just fly off the dash when I hit the throttle. Plus they are usually screaming by the time it gets into 2nd gear and just want out of the truck (or they are speechless). Too bad its winter here now & I really can't use all the power it has now. (Seriously! Holy Bat C&@$P does it fricking go!)
60 hp BD injectors, heads & ARP studs, PPE manifolds, up pipes & MBRP down pipe, EFI Live Tune w 5 knob, Sinister Diesel intercooler pipes, AFE Turbo neck inlet, 150ghp FASS lift pump, new Suncoast 6sp, torque converter, Fabtech Tie Rod ends, Edge Insight Monitor, new water pump & starter, hoses. Awesome Aluminum Bash Bar by Bandit. So now to do the "$5 dollar bill on the dash trick" that the Corvette guys do, I have to first tape it down to the dash. 'Cause it'll just fly off the dash when I hit the throttle. Plus they are usually screaming by the time it gets into 2nd gear and just want out of the truck (or they are speechless). Too bad its winter here now & I really can't use all the power it has now. (Seriously! Holy Bat C&@$P does it fricking go!)
Last edited:
cal tracks came in today,ordered fuel cell, and waiting on kryptonite front end kit.
Hooked up the spray this past weekend.
Sprayed it once and im addicted :woott:
Lol
YOU Sprayed it once and now I'm addicted....:spit:
:thumb:
Put a 2nd trans cooler on
Much better now. Should have done it earlier
Much better now. Should have done it earlier
havent yet but going to tear down the t case is the wifes lbz in a few and install the pump rub plate and tcase brace and magnitic drain plugs should be a fun afternoon
Well went to change the oil today and once on the lift I realized my down pipe was broke in two...... so before fathers day dinner I ripped it out and welded her back up. No more rattle either..huh go figure!
Well new pitman arm, idler arm, steering stabilizer, inner and outer tierods with sleeves.. FASS titanium 150 installed and that solved the stutter under full throttle she's all there now
Sent from my iPhone using Tapatalk
Are u putting urea down on ur yard ?
Sent from my iPhone using Tapatalk
Random question I know but ur lawn looks killer ! I guess btw nice truck to haha
Sent from my iPhone using Tapatalk
I used the A/C today. It was 85* and humid...for the second time this year!
Thank you, I mow it but I got tired of my neighbors lawns looking better than mine so I have a company come out and treat it and all I gotta do is hope it rains .. Because I can't ever remember to go outside and water it lol
Sent from my iPhone using Tapatalk
Tore my tcase down over the weekend and found a few bad parts. She needs the updated shift fork and hub, a new output bearing, throwing a new mode fork in for good measure and put her back together.
And no pump rub on the second case half after 90k (i replaced the case half once after pump rub took hold). Helps the steel tab is still in tact
And no pump rub on the second case half after 90k (i replaced the case half once after pump rub took hold). Helps the steel tab is still in tact
Drove it to and from work dreaming about mods I want but can't afford:roflmao:
Mounted new rims/tires in prep to remove lift and lower it in two weeks. Gathering all parts required including new front diff half and bearing kit.