Latest activity
-
Toxic replied to the thread New lml engine build, no fuel rail pressure.Replaced the fuel pressure regulator/relief valve in the driver side fuel rail with a brand new Bosch . I still get some fuel out of the... -
TheBac replied to the thread June '26 Chat -- Summertime!.Oh no, what have I done?!? I've unleashed the Mad Seal!!! :ROFLMAO: -
If it were easily reversable it would be one thing. However most require cutting stuff off the frame or differential and thats a no go...
-
2004LB7 replied to the thread 06 tap shifter in <05 truck.So, if the truck doesn't have a prndl, then what do we call it? 😛 Source: https://youtu.be/V2Sqx51sVi8 -
Bdsankey replied to the thread 06 tap shifter in <05 truck.Bingo -
The 5 speeds have one more detent than the 6 speeds and that’s why it goes lower. Aftermarket tap shift levers come with a different... -
Should have been a black one for 17K in Nevada. Lets see if this works. https://www.facebook.com/marketplace/item/26951851894455844/ -
You may be fine, but we're not 😁. We're going to push this as far as we can go 😛 -
darkness replied to the thread 06 tap shifter in <05 truck.The 5 speeds have one more detent than the 6 speeds and that’s why it goes lower. Aftermarket tap shift levers come with a different...
-
Glad I could entertain you guys for a day..... :ROFLMAO:
-
I installed an Allison 06+ tap shift lever in my truck (19431842) The shifter sits about 2 in. lower than the old shifter arm blocking...
-
DAVe3283 reacted to Phoenix-LH's post in the thread Bought a Sierra as Donortruck - now he stay with
Like.
Got today the tool for the steering column So we can go on with removing the dashskeleton The label arrived also. Like original... -
1FastBrick replied to the thread The New 17" PYOs from WCfab.Cool thanks!! -
I found tapered adapters for the 2500 upper ball joint size difference. Worked like a charm. Lower ball joint was same diameter. I...
-
1FastBrick replied to the thread June '26 Chat -- Summertime!.Just A Day...Challenge Excepted... ;)