whos running at weekend on the edge ?
- Thread starter TrentNell
- Start date
Myself and RED ROCKET are going to try to make it. we just got his truck running alot better so i think we wll put it on the dyno. We might be bringing a dodge too.
i'll se ya in the morning with my turbo
got it pulled sunday, are you going to run ?
I think I will pull the weight box and run even though its a little heavy for the track.i'll se ya in the morning with my turbo
ah you got the power to make up for it even if your stuck in the 12's with the rest of us chumps , better be careful matts truck might put an ass woopon on ya unless ya fill the bottle hes hitten 12 flat dam near.
oke:
Few trucks that are comming from Vegas and NM will be low 12's!
pourncoal has nailed a 11.60 before , i'm hoping for a mid 12 but i'll be running heavier wheels than usual 20's with 295/45r20 toyo proxes so i dont know how much it will slow me down but charger upgrade will be done and hoping to loose a little more weight trap speed says i can do it with a good 60 but we will see, at dhra i got 108.7 with a 12.82 tires should help alot with the 60 so we'll have to see
Last edited:
i'm hoping for a mid 12 but i'll be running heavier wheels than usual 20's with 295/45r20 toyo proxes so i dont know how much it will slow me down but charger upgrade will be done and hoping to loose a little more weight trap speed says i can do it with a good 60 but we will see, at dhra i got 108.7 with a 12.82 tires should help alot with the 60 so we'll have to see
Mid 12s easy for you. I ran a [email protected] 1.76 60ft All this was before the headers and up-pipes........oh, and my Banks super scoop! LOL:rofl:
.032 jet out of the hole in Phoenix @ 2000ft or so with my 200,000 mile stock single CP3, stock regulator. I cant wait to go back to AZ with my new mods. I doubt we will be setting any records in Utah since RMR is above 5000ft. Im not even sure if i will be there in time for the drags, im trying tho!!
Im scared to run a bigger jet but with my modded CP3 and regulator i will try a .045 or so...... If i get close to 12.0 then i will go bigger.
I just dont want to get slower:rofl:
I just dont want to get slower:rofl: