After searching old threads, I still am not sure of oil line size to use for the stock turbo remote feed line. I will have a hydraulic shop make up a new line for me. Do I use -4 or -6 line?
VGT Remote Oil Feed
- Thread starter valleyduramax
- Start date
Fleece (Fleece Link) and Danville (Danville Link) both make kits if you want to go down that route. If you want to make it yourself I believe its -6 line as there already is a restriction in your turbocharger oil feed hole.
Last edited:
Is there somewhere to put this info so anyone can see such as a "sticky" so can be used for future reference?