My stockers lasted 2 seasons at 1000+ hp. But had a customer break a output at 600hp
Truck went boom
- Thread starter OregonDMAX
- Start date
It's a total crapshoot weather it got the proper heat treating or not from what Mike was saying. They aren't all created equally. I be putting in a billet to prevent bad luck from hitting me again I talked myself out of it the first go around and lesson learned.
Hello, so have you figured out yet if you indeed did break the shaft?
Yep, confirmed. Going to see mike on Monday for a billet shaft
Sorry to hear it, Sean. It could've been worse.
You should find a pedal car to bring to Mike. :hehe:
You should find a pedal car to bring to Mike. :hehe:
Well... that blows. T case is so much easier...
Never posted the carnage or what I ended up doing. It did indeed break the input like I had previously stated. A small sliver of the shaft took out the pump as well. Put in billet input and output and Mike rebuilt the trans due to the pump.
Also had Mike's one off secret squirrel torque converter installed. Man does it rip. Just this converter change netted me a solid tenth off my 60ft time with zero other changes. It couple's so amazing and the response is unlike anything I've felt before.
Can't say anything else as im still dealing with fuelling issues but it's improved my launch and 60ft for sure
Also had Mike's one off secret squirrel torque converter installed. Man does it rip. Just this converter change netted me a solid tenth off my 60ft time with zero other changes. It couple's so amazing and the response is unlike anything I've felt before.
Can't say anything else as im still dealing with fuelling issues but it's improved my launch and 60ft for sure
Attachments
Glad ya got it figured out!!! Got to love two piece shafts though
What kind of fueling issues are you dealing with?
I haven't logged it yet but it's losing fuel on the back end of the 1/4 mile. It has a brand new exergy sportsman and lbz reg, I'm dealing with p0089 code that I am trying to resolve, started digging into wiring.
Last edited:
I see .