S472/87/1.0 sxe or s475/87/1.0 cast in a triple kit

Badheartbull

New member
May 21, 2012
88
0
0
50
Sw MN
I'm buy the turbo tomorrow. S472/87/1.0 sxe o ra cast s475/87/1.0 Which one would be best with the s366's cast? Is the billet 10 blade wheel any good? Thanks
 

Kunz111

Member
Jan 16, 2016
113
2
18
Not trying to thread jack but I have been thinking about triples also. I already have a 369 in the valley, would 2 364.5s feeding a 369 be a good set up? Would it make 1100-1200 with the right fuel?
 

CaptPhil

Active member
Sep 10, 2011
1,012
0
36
Delaware
I had run both a cast 472, a cast 475, and a billet 475 with two cast 366s. The spool time difference was negligible really. Both 400s were 87/.90. I tried 1.1 housing and it spooled a bit slower. Never made enough passes with the truck to tell if there was a power difference.

Sent from my SM-G900V using Tapatalk