Ride quality w/Cognito UCA, Fox shocks & cranked TB

[jonathancasey19]

Just added Cognito UCA's and Fox shocks to my Cognito 4-6-in NTBD lift.

Question:

Will ride quality deteriorate if I max out tbars while having more than 3/4-in space between UCA and frame stop? Lift is currently set at approx. 5-in. I have 2-in of space between UCA and frame stop. I'd like to raise to full 6-in as long as ride doesn't suffer. With exception of tierod ends and cv shaft, other angles look great with new hardware.

Thanks

 

[joshd472]

Leave it where it's at.

 

[Chevy1925]

cranking the truck up 1" will not give you 3/4" of space between the UCA and bump stop. you will likely have 1.5" of space.

i would not go beyond the 6" lift. if you do, ride starts to suffer.

 

[RPM Motorsports]

Minimum gap between UCA of 5/8" :thumb:

 

[S Phinney]

As long as the shock travel is adequate and it's not hitch in any stops you shouldn't have a problem. Make sure the ballpoints are on the bottom side of the arms.


Sent from my iPhone using Tapatalk