Have a slight vibration that I was chasing last year. Balanced tires, have a brand new driveshaft, but there is still vibration. have you guys had to do anything pinion angle wise? Thanks
question for anyone with a 5 inch djm drop
- Thread starter maine dmax
- Start date
Might have to do a shim in the rear. 3*-7* I believe is the range. Maybe hondarider552 will chime in because he had to do it in his.
Sounds like you need to shim as rickett said! Any lower then 5" especially on a crew cab you run into that problem because of the driveshaft angle...
Yeah I figure the driveshaft may be too flat
I got lucky with mine but I plan to go lower so I will eventually run into the same situation... I have heard the shimming isnt to hard nor very expensive...
Naw, adjusted pinion on a few vehicles. Just looking for direction. Per math calc. it needs more pinion angle on rear diff, but wasnt sure if I was chasing something else. Thanks
I have djm hangers and 3" shackles but still retaining the overloads. No vibration here.do you have your overloads in OP?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
4x4, 3 inch drop in the front, but cant see how that would effect pinion angle
That sucks, thought they claim maintain factory geometry/etc
They work fine if you run them at the height they recommend.