My Luck

Ne-max

Ne-max

I like turtles
Nov 15, 2011
3,361
64
48
Lincoln, Ne
I keep telling myself you get what you pay for as I get older and older. Ordered a Mbrp stainless kit for my LMM cause I did not like how my diamond eye kit fit. Figured I will just shell out the cash and do it right. The mbrp kit fit vary well but after 3 weeks it already looks like this. I expected a little surface rust but there is almost a solid line all the way down the last piece. Wonder how it will look in a year. Only drive truck on weekends. Just cant win anymore.

mbrp007_zpsee6d120e.jpg

mbrp008_zpsbd219816.jpg

mbrp009_zps6118a91c.jpg
 
ryan415

ryan415

New member
Oct 24, 2012
371
0
0
860
Wow. I've had a aluminized mbrp on my truck for a year, almost two winters and it has 0 rust. That sucks man
 
S

SmithLBZ

New member
Jan 11, 2012
91
0
0
TN
^^ Send the pics to them and see what they say.

I would bet they have some sort of warranty on it
 
DaveB

DaveB

New member
Sep 6, 2009
409
0
0
Northeast Indiana
I bet they will say it's normal. Only way to get no rust is 304 which is very pricey. I tell everyone I know that buys exhaust around here to paint it black before putting it on, otherwise it will rust and look like crap. Easier to paint when brand new. I learned on mine and went back and painted it all after it rusted.
 
Ne-max

Ne-max

I like turtles
Nov 15, 2011
3,361
64
48
Lincoln, Ne
The Best Systems Start With the Best Materials
Built from heavy duty T-409 stainless steel our SLM Series stainless performance exhaust systems offer a value price without compromising on the quality built into every component. While the seams are a major point of rust through with some budget systems our fully sealed tubing adds years to your system. Constructed to the same specifications as our top of the line Pro Series we back this line with an industry leading 5 Year Warranty.


Minimize Backpressure
The secret to getting more out of your diesel engine is to give it lots of cool, clean air. The only way that you can get fresh air in is to get the hot air out. From the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhaust out fast. Drop exhaust gas temperature by up to 200F and set the stage for all the performance you want. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders.

My ass. Haha
 
Dozerboy

Dozerboy

Well-known member
Jun 23, 2009
5,088
683
113
TX of course
Looks pretty normal to me. It doesn't say the seam won't rust it says it last a long time. I plan on getting and 409 system and know before hand I will paint it with roll on stove pipe paint.

Good luck with MBRP though
 
gr8shot

gr8shot

Practically stock
Apr 28, 2009
262
3
18
Grand Island, NE
Not sure what you expected with 409 stainless. There's still road salt on the weekends too, so that'll happen. It's not bad luck, it's just 409SS I've never been a fan of 409. Aluminized will last almost as long as long as you don't cut or weld it, or if you paint over cuts and/or welds.
 
Ne-max

Ne-max

I like turtles
Nov 15, 2011
3,361
64
48
Lincoln, Ne
gr8shot said:
Not sure what you expected with 409 stainless. There's still road salt on the weekends too, so that'll happen. It's not bad luck, it's just 409SS I've never been a fan of 409. Aluminized will last almost as long as long as you don't cut or weld it, or if you paint over cuts and/or welds.
Click to expand...

I read about it before I bought it so I expected surface rust and so fourth. All the other pipes are fine but this one. Seems like there is Just a issue with the seem. I just wonder if its like this after 3 weeks hows it going to look in a year or 2. Yes there is salt on roads on the weekends but I have yet drove it in the snow or slush. I have ran there aluminized kits and there clamps rust instantly if you dont paint them.
 
You must log in or register to reply here.
Top Bottom