Light drag wheels?
- Thread starter Builtlngbd
- Start date
48.6 lbs
http://www.duramaxdiesels.com/forum/showthread.php?t=23869
I've put tubes in the since...... So add a pound or two for that.
http://www.duramaxdiesels.com/forum/showthread.php?t=23869
I've put tubes in the since...... So add a pound or two for that.
Whats the height on the tire? And the bs on the rims? Looks nice and from what I can see around the same weight as the real wheels and slicks.
Thanks! I might go this route. Im going to compare the 2 and which ever is lighter I will go with. And then run the other for the street since they both seem light. 
It keeps the slick more flat .... more surface area touching the track.
I feel safer running less air with a tube also
A lot of guys screw the tire to the rim so it doesn't pop off the bead of the rim also, i havnt personally done that but have considered it
Also I duct tape over the wieghts to keep them on the rim, I had a set of weights fly off at the track once
I feel safer running less air with a tube also
A lot of guys screw the tire to the rim so it doesn't pop off the bead of the rim also, i havnt personally done that but have considered it
Also I duct tape over the wieghts to keep them on the rim, I had a set of weights fly off at the track once
Another good way to keep weights on is to spread a thin coat of clear silicone around the edges of the weights. It seals them in place. Been doing this on my cars for years & never lost a weight. It is almost invisible as well.
