I completed my lb7 to lbz swap over a year ago now but never had my tapshift wired up. Now im wanting to wire it up but when i look over all the threads that i used for doing my swap the tapshift portion is a little fuzzy to me. This is because my tapshifter came with 2 white wires and 1 black wire and 1 semi transparent black wire. Not your typical pink and purple combo. So if i read correctly 1 of my black wires will be spliced into "B" on the female side of connector C100. My other black wire will be spliced into F8 on the big plug on the back side of the drivers fuse panel? Thanks in advance for any help. Im just a little confused. Ive had my tow haul stuff working since the swap since the wires were simply right there but tapshift portion has thrown me for a loop.