LLY: Injector return line o-rings

[IOWA LLY]

Anyone find a good replacement for fuel return line o-rings? The one's that seal the little plastic tee's to the injector. I have several that are getting torn up and starting to seep a little. GM only sells the return lines as assembly's.

Thanks.

 

[bmos37]

Are these what you are looking for?

http://allseasondieselperformance.com/index.php?main_page=index&cPath=47_90

I also have the line (DS) with 1 bad fitting i will let go for 75.00

 

[IOWA LLY]

No, that would work obviously. But I would like to replace only the o-ring.

 

[TIMTHECARMAN2004]

AJ,

We can get the whole return hose with t's in it for around $25 to $30. I haven't seen where we can get just the orings...

 

[MAXLLY]

go to a transmission shop and search the o - ring boxes - after i paid $115 for the line i got smart.

 

[IOWA LLY]

AJ,

We can get the whole return hose with t's in it for around $25 to $30. I haven't seen where we can get just the orings...

Hmmm. That's not a bad price for the assembly's. If I can't find an o-ring that works I will get in touch with you.

Thanks Tim.

 

[TIMTHECARMAN2004]

Let me know. Always here to help.

 

[zf>allison]

Bump for oring info, I have a brand new return assembly on my truck and one is leaking. I'm sure even though I lubed the orings I must have torn one and I don't want to buy another assembly.

 

[Gmclbz]

IIRC Merchant sells the lines per side also, around $60 I think.

 

[TheBac]

Cant you just measure the old oring and find a viton replacement just about anywhere??

 

[zf>allison]

Cant you just measure the old oring and find a viton replacement just about anywhere??[/QUOTE
well that would be pretty cool, didn't know of they sold a kit of them from somewhere.

 

[Burn Down]

I didn't have any luck in AK finding that seal... Nothing Cat had was that small. I nicked one when I did the head gaskets on my truck. I cleaned the seal up with brake clean and used some black RTV called the right stuff on the seal. Hasn't leaked since. I will have to hunt in Boise for that o-ring when I get chance.